Cart 2 india

Specification
Brand : PATIKIL
BulletPoint1 : PACKING LIST: 20pcs x Carbon Gouging Rod; Length: 355mm/14 inch; Diameter: 4mm/0.16 inch; Material: Copper, Graphite
BulletPoint2 : FEATURE: After baking at 2200℃, it is made by plating a layer of copper. It has high-temperature resistance, good electrical conductivity is not easy to break, and has low noise. It is suitable for cutting metals into shapes that meet the requirements.
BulletPoint3 : APPLICATION: Carbon rods are non-metallic products. As a necessary pre-welding cutting consumable in the carbon arc gouging cutting process, they are made of carbon, graphite and appropriate binders, and are formed by extrusion. Widely used in the shipbuilding industry, highway and bridge construction, steel industry, oil pipeline, etc., mainly used for full penetration weld formed by double-sided welding.
BulletPoint4 : NOTE: When used in the DC power supply, the carbon rod is connected to the positive pole of the power supply, and the workpiece is connected to the negative pole, which needs to be operated according to the working current.
BulletPoint5 : INSTRUCTION: When cutting, it can be processed by arc cutting. The carbon rod and the workpiece are at an angle of 45°. The carbon rod must be kept dry, and it must be dried before use when wet.
ExternallyAssignedProductIdentifier : 4582350190250
ExternallyAssignedProductIdentifier1 : 0707326170133
ExternallyAssignedProductIdentifier2 : 707326170133
FinishType : Finish
IncludedComponents : inc
ItemForm : Rod
ItemName : PATIKIL 20pcs 4mmx355mm(0.16"x14") Carbon Arc Air Gouging Rods Copper Graphite Coated Gouging Electrode Rods for Welding
ItemPackageDimensions_Height : 4.5 centimeters
ItemPackageDimensions_Length : 38 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : arc-welding-stick-electrodes
Manufacturer : PATIKIL
Material : Copper
ModelNumber : ZTIP102HC0
NumberOfItems : 450
PartNumber : pta240114tt000207eu
Pattern : TIP #1
PowerSourceType : PowerSource
ProductDescription : √FEATURE:
After baking at 2200C, it is made by plating a layer of copper. It has high-temperature resistance, good electrical conductivity is not easy to break, and has low noise. It is suitable for cutting metals into shapes that meet the requirements.

√APPLICATION:
Carbon rods are non-metallic products. As a necessary pre-welding cutting consumable in the carbon arc gouging cutting process, they are made of carbon, graphite and appropriate binders, and are formed by extrusion. Widely used in the shipbuilding industry, highway and bridge construction, steel industry, oil pipeline, etc., mainly used for full penetration weld formed by double-sided welding.

√Package Content: 20pcs x Carbon Gouging Rod; Length: 355mm/14 inch; Diameter: 4mm/0.16 inch; Material: Copper, Graphite

√NOTE:
Tips: When used in the DC power supply, the carbon rod is connected to the positive pole of the power supply, and the workpiece is connected to the negative pole, which needs to be operated according to the working current.
ProductSiteLaunchDate : 2024-04-03T05:12:29.637Z
Size : 4mm x 355mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1