Cart 2 india

Specification
Brand : Lincoln Electric
BulletPoint1 : Container type- Can
BulletPoint2 : Type- Excalibur 7018 MR
BulletPoint3 : Material- Mild steel
BulletPoint4 : This electrode has a soft, steady and quiet arc that produces very little smoke or spatter
BulletPoint5 : Select your Electrode Diameter and Package Quantity from the Options - Check Picture #3 for Welding Parameters.
Capacity : 10 pounds
CareInstructions : Hand Wash Only
Color : Silver
ExternallyAssignedProductIdentifier1 : 015082691756
ExternallyAssignedProductIdentifier2 : 0015082691756
ExternallyAssignedProductIdentifier3 : 00715959286626
IncludedComponents : Product & Instructions Guide
ItemDisplayWeight : 4.55 pounds
ItemForm : cylindrical
ItemName : Lincoln Electric - ED032589 - LINCOLN ELECTRIC Stick Elect.,7018 MR,1/8 In,14 L,10 lb. ED032589
ItemPackageDimensions_Height : 36.83 centimeters
ItemPackageDimensions_Length : 8.128 centimeters
ItemPackageDimensions_Width : 8.128 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : arc-welding-stick-electrodes
ItemVolume : 10 liters
Manufacturer : Lincoln Electric
Material : Mild Steel
MeasurementSystem : Metric
ModelName : ENiCl - 99% Nickel/Cast Iron Welding Electrode - 12" x 3/32" (5 STICKS)
ModelNumber : ED032589
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : ED032589
PowerSourceType : ac/dc
ProductDescription : Instructions: Clean the weld zone of contaminants as well as possible. A small AC machine or DC machine (electrode + reverse polarity or – straight polarity) can both be used! AC will prevent arc blow, DC+ reverse polarity produces deeper penetrating welds on medium gauge steels and DC- straight polarity on thinner or light gauge steels. Set amperage to the proper range as listed on the product recommended amperage chart. Maintain a short arc length and hold the electrode at a 15° angle and use a slight back and forth whipping motion. If overhead welding, use a straight circular motion. For vertical-down welding, choose amperage in the upper end of the recommended range and use stringer beads or a slight weaving technique keeping the weld puddle in place by pointing the electrode up into the puddle. For vertical-up welding, use amperage settings in the lower end of the recommended range and use the shelf or step method adding layer on top of layer. Do not use whipping motion. Allow the part to air-cool and remove slag with a chipping hammer and brush to a nice finish.
ProductSiteLaunchDate : 2011-09-22T10:25:16.028Z
RecommendedUsesForProduct : Dry foods, Biscuits, Dry goods
Size : 1/8" - (44 Lb)
Style : Music
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23271800