Cart 2 india

Specification
Brand : Blue Demon
BulletPoint1 : Faste freezing or rapid solidification of the metal allows welding in the vertical and overhead position
BulletPoint2 : Its light slag eliminates slage holes that are prevalent on some applications with other electrodes
BulletPoint3 : Typical applications include general purpose fabrication, galvanized steel work, structural work and shipbuilding
BulletPoint4 : This electrode has a soft, steady and quiet arc that produces very little smoke or spatter
BulletPoint5 : Select your Electrode Diameter and Package Quantity from the Options - Check Picture #3 for Welding Parameters.
Capacity : 10 pounds
CareInstructions : Hand Wash Only
Color : Silver
ExternallyAssignedProductIdentifier1 : 652426492688
ExternallyAssignedProductIdentifier2 : 0652426492688
ExternallyAssignedProductIdentifier3 : 00652426492688
IncludedComponents : 50 lbs of E6011 electrodes
ItemDisplayWeight : 4.55 pounds
ItemForm : cylindrical
ItemName : Blue Demon 6011 X 1/8" X 14" X 50LB Carton Carbon Steel Electrode for AC Welding
ItemPackageDimensions_Height : 39.37 centimeters
ItemPackageDimensions_Length : 13.97 centimeters
ItemPackageDimensions_Width : 25.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : arc-welding-stick-electrodes
ItemVolume : 10 liters
Manufacturer : Blue Demon
Material : fabric
MeasurementSystem : Metric
ModelName : E6011-125-50
ModelNumber : E6011-125-50
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : E6011-125-50
PowerSourceType : dc
ProductDescription : Instructions: Clean the weld zone of contaminants as well as possible. A small AC machine or DC machine (electrode + reverse polarity or – straight polarity) can both be used! AC will prevent arc blow, DC+ reverse polarity produces deeper penetrating welds on medium gauge steels and DC- straight polarity on thinner or light gauge steels. Set amperage to the proper range as listed on the product recommended amperage chart. Maintain a short arc length and hold the electrode at a 15° angle and use a slight back and forth whipping motion. If overhead welding, use a straight circular motion. For vertical-down welding, choose amperage in the upper end of the recommended range and use stringer beads or a slight weaving technique keeping the weld puddle in place by pointing the electrode up into the puddle. For vertical-up welding, use amperage settings in the lower end of the recommended range and use the shelf or step method adding layer on top of layer. Do not use whipping motion. Allow the part to air-cool and remove slag with a chipping hammer and brush to a nice finish.
ProductSiteLaunchDate : 2013-10-21T00:00:01-07:00
RecommendedUsesForProduct : Dry foods, Biscuits, Dry goods
Size : 1/8"(Diameter)
Style : 50# Carton
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23271800