Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Material Thickness : 0.8mm; Material Width : 10mm/0.39inch; Spring OD : 53mm/2.09inch; Expand Length (about) : 1540mm/60.63inch
BulletPoint2 : Inner Mounting Type : Hole; Outer Mounting Type : Circle，Pack with 3 x Drill Press Spring
BulletPoint3 : ☆ The drill press quill return spring is good replacement for many existing quill spring drill presses, this spring will returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, and so on.
BulletPoint4 : ☆ Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust.
BulletPoint5 : ☆ Pay attention when installing springs. Do not loosen the wire of fixed springs! When installing, install the spring with a fixed wire directly into the spring seat, and the wire will slide out.
ItemName : uxcell Drill Press Spring Drill Press Quill Feed Return Coil Spring Assembly Spring Steel Chemical Blackening Finish 1540mm Expand Long 53 x 10 x 0.8mm 3 Pcs
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 3
ItemTypeKeyword : power-stationary-drill-presses
Manufacturer : uxcell
PartNumber : a24052500ux0426
ProductDescription : Description:
1.The drill press quill return spring is a good replacement for many existing quill spring drill presses, this spring will return the quill to the top after you have completed drilling and used to all kinds of vacuum cleaner coil springs, volume tube coil springs, and so on.
2. Chemical Blackening, the product's performance forms an oxide film, divide the air, and prevents rust.
3. Pay attention when installing springs. Do not loosen the wire of the fixed springs! When installing, install the spring with a fixed wire directly into the spring seat, and the wire will slide out.

Specification:
Material : Spring Steel
Finish : Chemical Blackening
Material Thickness : 0.8mm
Material Width : 10mm/0.39inch
Spring OD : 53mm/2.09inch
Expand Length (about) : 1540mm/60.63inch
Inner Mounting Type : Cylindrical Bore
Outer Mounting Type : Ring
Package Content :
3 x Drill Press Spring

ProductSiteLaunchDate : 2024-06-11T10:03:46.436Z
Size : 53 x 10 x 0.8mm - 1540mm Long
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 3