Description
Piling work is usually carried out in relatively harsh environments, where traditional piling methods are very unsafe and inefficient. Fortunately, with this petrol post driver, your piling work can be very simple! The 1900W, 52cc two-stroke engine provides sufficient power to help you save time and energy, while the thoughtful shock absorption design and safety lock ensure your safety and comfort during use.
Details
Carburetor: It allows fuel to burn more fully during operation, avoiding fuel waste while also being very cost-effective.
2 Post Driving-head: The 2 post-driving heads (2.17in, 2.76in) make this an ideal choice for T-Posts, Y-Posts, and ground rods.
Throttle Adjustment Switch: You can freely control the throttle and easily adapt to various working environments.
Application
This petrol post driver is suitable for professional or daily household users to use in a series of pile-driving projects such as fences, star stakes, stakes, geophysical exploration, buildings, guardrails, brackets, photovoltaic power stations, forestry seedlings, vineyard brackets, vegetable planting, orchard brackets, fence protection, etc.
Specifications
Material: ABS, Iron, Aluminum, Alloy Steel, HDR
Surface Treatment: Spray-paint, Blackening
Color: Black, Red, Grey
Power Source: Gas Powered
Starter System: Hand Pull Start
Engine Type: Two-stroke, Air Cooling, Single-cylinder
Number of Items: 1
Power: 1900W
Noise: ≤103DBA
Displacement: 52cc
Max. Torque: 3.5N.m
Gasoline Type: #92
Impact Energy: 25-45J
Fuel Tank Capacity: 1L/0.26gal
Impact Frequency: 800-2800BPM
Fuel Consumption Rate: ≤0.5L/h
Maximum Rotational Speed: 6500RPM
Fuel Type: Mixed Oil (25 Gasoline: 1 2-stroke Engine Oil)
Gross Weight: 22.7kg/50lbs
Net Weight: 20.95kg/46.18lbs
Equipped Socket Size: 55mm/2.17in(Small), 70mm/2.76in(Big)
Product Size: 80*35*25cm/31.5*13.78*9.84in
Package Size: 73*44*35cm/28.74*17.32*13.78in
Package Included
1*Petrol Post Driver
2*Post Driving Heads
1*Oil-mixing Kettle
1*Tools Kit
1*Funnel
1*Filter Nozzle
1*English Manual
All Accessories for Assembly
Notes
1.Please read the manual carefully and strictly follow the precautions for a better experience.
2.If this product does not hammer, please check if too much lubricating oil has been added. Clean the excess oil in the cylinder and add about 20 grams of high-temperature resistant lubricating oil again.
3.If the impact frequency is too high to hold by hand, it is recommended to slightly reduce the speed of the carburetor. Otherwise, please increase the impact frequency.
4.If the machine is not easy to start, first check the ratio of oil: gasoline: oil=25:1 (please note to use 2-stroke oil), then pull out the rope for arm's length and continue pulling it two or three times to start. When the machine starts cold, please close the baffle and wait for the machine to function properly before opening it.