Specification Brand : uxcell BulletPoint1 : [Size] - 3/8" square drive socket, T40 torx bit, 2.36-inch (60mm) total length. BulletPoint2 : [Torque Strength] - Chrome-molybdenum steel has excellent durability and strength with every impact movement; black phosphate coating for extra protection against rust and corrosion. BulletPoint3 : [Chamfered Design] - Chamfered ends insert smoothly into fastener head, reducing wear. BulletPoint4 : [Pin Hole] - Individual pinhole base design adds extra security by placing in a locking pin for stability when exerting strong torque motion. BulletPoint5 : [Widely Used] - Use with a ratchet to increase the speed of tightening square drive fasteners. And the product has no insulation properties and is not suitable for electrical environments. BulletPoint6 : Compatible Pin Product Number: P3020S Compatible O-Ring Product Number: RP20S *Includes 10 plastic bags BulletPoint7 : WARNING: Please ensure the O-ring pins are properly sized before using. O-ring pins are consumables. Replace worn or worn Color : Multi CompatibleFastenerDescription : 0.375 inch DriveSystem : Torx DriveSystem1 : Square DriveSystem2 : Torx ExternallyAssignedProductIdentifier : 4953488266474 ExternallyAssignedProductIdentifier1 : 053001178001 ExternallyAssignedProductIdentifier2 : 0053001178001 ExternallyAssignedProductIdentifier3 : 00053001178001 FinishType : Black Phosphate Coating,Black Phosphate Finish ItemDisplayWeight : 0.5 pounds ItemLength : 2.36 inches ItemName : uxcell T40 Impact Torx Bit Socket, 3/8" Square Drive 60mm Length CR-MO Metric Sizes ItemPackageDimensions_Height : 13.8 centimeters ItemPackageDimensions_Length : 2.6 centimeters ItemPackageDimensions_Width : 9.3 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : star-drive-sockets Manufacturer : uxcell Material : Chrome Molybdenum Steel Material1 : S2 Steel Material2 : Chrome Molybdenum Steel ModelName : A178 ModelNumber : a21101400ux0327 NumberOfBoxes : 1 NumberOfItems : 1 NumberOfPieces : 1 PackageLevel : unit PartNumber : a21101400ux0327 ProductDescription : Forged with chromium molybdenum steel material, surface heat treatment, high strength and durability. To prevent rust and corrosion, the black phosphate finish absorbs and retains oil, repelling moisture. The through-hole in the drive end locks onto the tang of impact wrenches or drivers so it won't fall off or stick on fastener heads. It has a radius corner design, causing the socket to grasp the sturdy wall of the fastener instead of the corners, thereby reducing the wear of the fastener. Widely used in DIY hand-making, household maintenance, and most general repairs.
Specification: Driver Size: 3/8 Inch Bit Size: T40 Total Length: 60mm / 2.36 Inch Material: Chrome Molybdenum Steel (CR-MO) Finish: Phosphating