Cart 2 india

Specification
Brand : Fastenere
BulletPoint : In general, fine thread fasteners are about 10% stronger than coarse threads under static loading.
BulletPoint1 : For use with an externally threaded item that measure 1 inch and has 8 threads per inch.
BulletPoint2 : Width Measured From Flat to Flat 1-1/2"
BulletPoint3 : Height 55/64"
BulletPoint4 : Hex Socket Drive 1-1/2"
BulletPoint5 : Grade 360 Brass, known for its strength and resistance to corrosion with properties closely resembling that of steel, is one of the most popular copper alloys used today. produced from a combination of copper and zinc, has the highest machinability of all copper alloys, and is the standard against which all the others are compared to.
DriveSystem : External Hex
ExteriorFinish : Plain
ExternallyAssignedProductIdentifier1 : 842176125732
ExternallyAssignedProductIdentifier2 : 0842176125732
FinishType : Clear
GradeRating : Grade 360
ItemName : 1-8 Full Finished Hex Nuts, Solid Brass, Grade 360, Plain Finish, Quantity 5
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 5
ItemTypeKeyword : hex-nuts
Manufacturer : Fastenere
Material : Brass
MeasurementSystem : Inch
MetalType : Alloy Steel
MetalType1 : Alloy Steel
MetalType2 : Copper
MetalType3 : Brass
ModelNumber : ME335-1010-00050
NumberOfItems : 5
NumberOfPieces : 5
PartNumber : 3RNFF916C
ProductDescription : A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten two or more parts together. The two partners are kept together by a combination of their threads' friction, a slight stretching of the bolt, and compression of the parts to be held together. In normal use, a nut-and-bolt joint holds together because the bolt is under a constant tensile stress called the preload. The preload pulls the nut threads against the bolt threads, and the nut face against the bearing surface, with a constant force, so that the nut cannot rotate without overcoming the friction between these surfaces. If the joint is subjected to vibration, however, the preload increases and decreases with each cycle of movement. If the minimum preload during the vibration cycle is not enough to hold the nut firmly in contact with the bolt and the bearing surface, then the nut is likely to become loose.
ProductSiteLaunchDate : 2016-08-24T19:33:53.017Z
Size : 1-8 (5 Pack)
UnitCount : 50
UnspscCode : 31161700