Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : STANDARD: Cutting edge diameter: 3mm / 0.118"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 12mm / 0.47"
BulletPoint2 : MATERIAL: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
BulletPoint3 : FEATURES: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
BulletPoint4 : CHARACTERISTICS: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
BulletPoint5 : APPLICATION: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon board. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life.
CutType : Square Nose
CutType1 : Square
CutType2 : Finishing
EndCutType : Square End
FinishType : Unfinished
GpsrSafetyAttestation : 1
HelixAngle : 35 degrees
ItemName : uxcell 10Pcs 3mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
ItemPackageDimensions_Height : 14 centimeters
ItemPackageDimensions_Length : 3.7 centimeters
ItemPackageDimensions_Width : 9.1 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : square-nose-end-mills
Manufacturer : uxcell
Material : Carbide
ModelNumber : a19031400ux0497
NumberOfCuttingEdges : 12
NumberOfFlutes : 2
PartNumber : a19031400ux0497
ProductDescription : Specification:
Cutting Edge Diameter: 3mm / 0.118"
Shank Diameter: 3.175mm / 1/8"
Cutting Edge Length: 12mm / 0.47"
Overall Length: 38mm / 1.5"
Material: Cemented Carbide
Package Content: 10 x Carbide End Mill Engraving Bits

Description:
1. Made from carbide material, good milling properties to ensure efficient work.
2. Great replacements for your CNC or PCB machinery. With sufficient flexural strength and wear resistance.
3. Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
4. Wide ranges of materials can be engraved, including: circuit boards, metal, plastics, wood, SMT, PCB, fiber glass, carbon, etc..
5. Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
6. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
ProductSiteLaunchDate : 2019-04-15T02:00:35.093Z
Size : 3x12mm
Style : Square End
SupplierDeclaredDgHzRegulation : not_applicable
ToleranceHeld : Standard
UnitCount : 10
UnspscCode : 27112803