Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Features: Cutting Edge Diameter: 0.7mm / 0.028", 0.6mm / 0.024"; Shank Diameter: 3.175mm / 1/8"; Cutting Edge Length: 5.5mm / 0.22", 5mm / 0.2"; Overall Length: 38mm / 1.5"
BulletPoint2 : MATERIAL: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
BulletPoint3 : FEATURES: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
BulletPoint4 : CHARACTERISTICS: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
BulletPoint5 : APPLICATION: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon board. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life.
ExternallyAssignedProductIdentifier1 : 0309272827750
ExternallyAssignedProductIdentifier2 : 309272827750
IncludedComponents : End Mills
ItemName : uxcell 0.7mm,0.6mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank 20Pcs
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : square-nose-end-mills
Manufacturer : uxcell
Material : Tungsten Carbide
ModelNumber : Garosawmgsa5oqp3
NumberOfFlutes : 1
NumberOfItems : 1
PartNumber : f22040600ux0277
ProductDescription : Specification:
Cutting Edge Diameter: 0.7mm / 0.028", 0.6mm / 0.024"
Shank Diameter: 3.175mm / 1/8"
Cutting Edge Length: 5.5mm / 0.22", 5mm / 0.2"
Overall Length: 38mm / 1.5"

Package Content :
10 x 0.7mm Carbide End Mill Engraving Bits
10 x 0.6mm Carbide End Mill Engraving Bits

Features:
1. Made from carbide material, good milling properties to ensure efficient work.
2. Great replacements for your CNC or PCB machinery. With sufficient flexural strength and wear resistance.
3. Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
4. Wide ranges of materials can be engraved, including: circuit boards, metal, plastics, wood, SMT, PCB, fiber glass, carbon, etc..
5. Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
6. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
ProductSiteLaunchDate : 2023-04-10T08:10:40.649Z
SupplierDeclaredDgHzRegulation : not_applicable
ToleranceHeld : Standard
UnitCount : 20