Cart 2 india

Specification
Brand : CoCud
BulletPoint1 : ★ Square Nose End Mill Size --- The end mill with 6mm / 0.24" cutting diameter; 30mm / 1.18" cutting length; 6mm / 0.24" shank diameter; 100mm / 4" total length; 2 flutes; 35 degree spiral angle.
BulletPoint2 : ★ Wide Applications --- Suitable for creating flat-bottomed slots, pockets, or profiles. It is used for machining stainless steel, alloy steel, cast iron, hardened steel, non-ferrous metals, aluminum and plastics. (HRC45 cutting hardness)
BulletPoint3 : ★Ease of Use --- Sharp square cutting edges allow for efficient, precise milling operations, and 2 flutes help improve chip evacuation and reduce the chance of clogging during machining. Used with CNC milling machines, router machines, and engraving machines.
BulletPoint4 : ★ P05 Tungsten Carbide --- Provides excellent hardness, wear resistance, high strength, good toughness and heat resistance. AlTiN multilayer coatings improve lubricity, reduce friction, and enhance hardness, wear resistance and overall tool life, and increase cutting speeds and feeds
BulletPoint5 : ★ Useful Tips --- Make sure it is securely seated and tightened. Use an appropriate coolant or lubricant to enhance chip evacuation and heat dissipation, and monitor and control the cutting parameters. Excessive heat can affect tool life and performance.
Color : silver
CutType : Square
EndCutType : Square End
ExternallyAssignedProductIdentifier : 4713506497217
ExternallyAssignedProductIdentifier1 : 0644380070323
ExternallyAssignedProductIdentifier2 : 644380070323
FinishType : AlTiN
IncludedComponents : End Mills
ItemName : CoCud Square Nose End Mill, 6mm x 30mm Cutting 6mm Shank, AlTiN Coated P05 Carbide 2 Flutes CNC Router Bits - (Applications: for Milling Stainless Steel Hardened Steel)
ItemPackageDimensions_Height : 14 centimeters
ItemPackageDimensions_Length : 2.1 centimeters
ItemPackageDimensions_Width : 7.3 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : square-nose-end-mills
Manufacturer : CoCud
Material : Carbide
Material1 : High Speed Steel
Material2 : Tungsten Carbide
ModelNumber : GSIVCIOA
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : cuf230726dd000113eu
ProductDescription : Attributes:
* Cutting Diameter: 6mm / 0.24"
* Cutting Length: 30mm / 1.18"
* Shank Diameter: 6mm / 0.24"
* Total Length: 100mm / 4"
* Material: P05 Tungsten Carbide
* Finish: (Aluminum Titanium Nitride) AlTiN Coated
* End Cut Type: Square End
* Cutting Hardness: HRC45
* Flute Design: 2 Flutes, 35 Degree Spiral Angle

What Is Included:
* 1 Piece x Square Nose End Mill

Applications & Features:
--- The square nose end mill is suitable for creating flat-bottomed slots, pockets, or profiles. It is used for machining stainless steel, alloy steel, cast iron, hardened steel, non-ferrous metals, aluminum and plastics. The end mill can be used with CNC milling machines, router machines, and engraving machines.
--- Square cutting edges allow for efficient, precise milling operations, and 2 flutes help improve chip evacuation and reduce the chance of clogging during machining. The P05 tungsten carbide provides excellent hardness, wear resistance, good toughness, high strength, and good thermal stability (heat resistance).
--- AlTiN (Titanium Aluminum Nitride) multilayer coatings improve lubricity, reduce friction, and enhance hardness, wear resistance and overall tool life, and increase cutting speeds and feeds. It also helps minimize built-up edge formation, and contributes to a smoother surface finish.

Useful Tips:
--- Make sure the end mil is securely seated and tightened. Use an appropriate coolant or lubricant to enhance chip evacuation and heat dissipation. Excessive heat can affect tool life and performance. Monitor and control the cutting parameters, ensure proper cooling or lubrication and effective chip evacuation to prevent clogging.
ProductSiteLaunchDate : 2023-09-17T14:02:40.869Z
Size : 50mm(60 degrees)
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1