Cart 2 india

Specification
Brand : Sturdy Built
BulletPoint : Replacement for 2x Short 5.6" Equalizers 9/16 Hole 1 3/4" Wide Spring Trailer Center Pivot
BulletPoint1 : Slipper Style Trailer Leaf Springs - Set of 2
BulletPoint2 : 2 Leafs
BulletPoint3 : 700lb Capacity Each (1,400lb total capacity)
BulletPoint4 : Fits Spring Hangers that are spaced 25'' center to center.
BulletPoint5 : Rated at 4000 lb's Per pair (2000 lb's per Spring)
Color : Black
ExternallyAssignedProductIdentifier : 7437563090880
FitType : Universal
IncludedComponents : Trailer Slipper Leaf Springs
ItemName : Sturdy Built 23 in Double Eye 3 Leaf Trailer Spring 1750lb Capacity
ItemPackageQuantity : 1
ItemTypeKeyword : trailer-springs
Manufacturer : Sturdy Built
Material : Steel
ModelName : 24030-2
ModelNumber : 24030-2
NumberOfItems : 2
PartNumber : 24002
ProductDescription : 23 1/4 inch Double Eye 3 Leaf Spring that is rated to 1750 lbs per spring. This would bring a pair of these 23 1/4 inch Double Eye Trailer Springs to 3500 pounds. These are common on 3500 lb trailer axles.  Spring Measurements and Specs:Eye to Eye Measurement  23 1/4 inches (Free Length Measurement)-Does your spring measure slightly more than 23 1/4 inches, lets say 23 3/4 or so? You may have your trailer loaded, or the spring may be old and flattened out. It is not uncommon for leaf springs to measure longer than what the stock size is listed. Free Arch Measurement (see picture) 3 1/8 inches-The free arch measurement is based off a stock, brand new spring. Your leaf spring will more than likely be flattened out, or possibly broken. -This Trailer Leaf Spring measures 1 3/4 inches wide9/16 inch bushings come installed in the spring, 1/2 inch are available as an add on.These springs can be used on both square tube or round tube trailer axles on boats or land trailers. The only difference is in the style of U-Bolt Required to mount the spring to the axle. Check the condition of your U-Bolts and the required size and check our U Bolt Kits out here. Leaf Spring U-Bolt Kits. Available in raw steel, hot-dipped galvanized, and stainless steel.If you are planning on replacing the hangers, (brackets that are either welded or bolted to frame that hold leaf spring) and shackles (2 shackles towards rear of spring assembly for single per side or 4 in the middle for tandem trailer per side) We have single and double spring hanger kits available for Weld On assemblies that include all the necessary replacement hardware. Weld on assemblies are more common on non marine trailers.Spring HangersBoat trailers will commonly have bolt-on hangers or spring sliders. 
ProductSiteLaunchDate : 2022-08-23T13:18:21.007Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31161500