Cart 2 india

Specification
Brand : DNYSYSJ
BulletPoint1 : Power: 500W,Rotational Speed: 2800 rpm,Voltage: 110V/60Hz
BulletPoint2 : Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
BulletPoint3 : Connect the waste-disposal tube to the unit, Connect the power cord, and switch on the power switch (O=off, l=on)
BulletPoint4 : The machine does not work when power on,How to solve it：① change the fuse（22） which inside the socket；② change the motor ③ change the switch
ExternallyAssignedProductIdentifier1 : 0794590349549
ExternallyAssignedProductIdentifier2 : 794590349549
Hazmat1 : LITHIUM ION BATTERIES PACKED WITH EQUIPMENT
Hazmat10 : DE_SmallLithiumIonBatteryWithEquipment
Hazmat11 : EG_SmallLithiumIonBatteryWithEquipment
Hazmat12 : ES_SmallLithiumIonBatteryWithEquipment
Hazmat13 : FR_SmallLithiumIonBatteryWithEquipment
Hazmat14 : GB_SmallLithiumIonBatteryWithEquipment
Hazmat15 : IN_SmallLithiumIonBatteryWithEquipment
Hazmat16 : IT_SmallLithiumIonBatteryWithEquipment
Hazmat17 : JP_SmallLithiumIonBatteryWithEquipment
Hazmat18 : MX_SmallLithiumIonBatteryWithEquipment
Hazmat19 : NL_SmallLithiumIonBatteryWithEquipment
Hazmat2 : UN3481
Hazmat20 : PL_SmallLithiumIonBatteryWithEquipment
Hazmat21 : SA_SmallLithiumIonBatteryWithEquipment
Hazmat22 : SE_SmallLithiumIonBatteryWithEquipment
Hazmat23 : SG_SmallLithiumIonBatteryWithEquipment
Hazmat24 : TR_SmallLithiumIonBatteryWithEquipment
Hazmat25 : US_SmallLithiumIonBatteryWithEquipment
Hazmat3 : II
Hazmat4 : 9
Hazmat5 : AE_SmallLithiumIonBatteryWithEquipment
Hazmat6 : AU_SmallLithiumIonBatteryWithEquipment
Hazmat7 : BR_SmallLithiumIonBatteryWithEquipment
Hazmat8 : CA_SmallLithiumIonBatteryWithEquipment
Hazmat9 : CN_SmallLithiumIonBatteryWithEquipment
ItemName : DNYSYSJ Dental Wet Model Trimmer Abrasive Machine Gypsum Arch Inner Disc Wheel 500W
ItemTypeKeyword : professional-dental-orthodontic-springs
Manufacturer : WANGYANG shop
PartNumber : JT19SA
ProductDescription : Features:

1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve

2. Connect the waste-disposal tube to the unit

3. Connect the power cord, and switch on the power switch (O=off, l=on)

4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)

5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)

Attention:

If there is some abnormal noise when working on

Possible reason：① Axon is loosing ② Disc is not plain enough.

How to solve it：①Dissemble the disc⒃ with spanner，make the snap

Ring tightly；② change the disc.

The machine does not work when power on.

Possible reason：① fuse get burnt；② motor get burnt；③ switch get wrong.

How to solve it：① change the fuse（22） which inside the socket；② change the motor ③ change the switch

Specifications

Voltage: 110V/60Hz

Power: 500W

Rotational Speed: 2800 rpm

Dimensions: 44×35×35cm

Weight of the dental trimmer: 20kg

Content:

1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment


ProductSiteLaunchDate : 2021-03-05T03:46:38.042Z