Cart 2 india

Specification
Brand : TBVECHI
BulletPoint1 : Welding Machine: 800W 110V Adjustable High Power Argon Pulse Spot Welder Necklace Bracelet Jewelry JD Welding Machine.
BulletPoint2 : Specification: Adjustable pulse spot welding machine (JD welding machine). Power supply: AC110V. Power: 800W. Welding current: 0.5-80A continuously adjustable (pulse ignition).
BulletPoint3 : Features: Welding can change the output pulse current according to the size of the workpiece, the size of the solder joints, and the process requirements.
BulletPoint4 : Welding Machine Use Range: All precious metal, precious metal alloy materials, such as gold, silver, platinum, palladium, stainless steel, titanium, all of which are weak arc welding metals can be welded.
BulletPoint5 : 10pcs in package, fit for: Sunkko Spot welder 709A 709AD
Color : Brown
ExternallyAssignedProductIdentifier1 : 0760385727588
ExternallyAssignedProductIdentifier2 : 760385727588
ItemDisplayDimensions_Height : 0.8 inches
ItemDisplayDimensions_Length : 3.5 inches
ItemDisplayDimensions_Width : 0.8 inches
ItemDisplayWeight : 0.06 pounds
ItemName : Welding Machine TBVECHI 800W 110V Adjustable High Power Argon Pulse Spot Welder Necklace Bracelet Jewelry JD Welding Machine
ItemPackageDimensions_Height : 8.382 centimeters
ItemPackageDimensions_Length : 2.032 centimeters
ItemPackageDimensions_Width : 3.81 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spot-welding-equipment
Manufacturer : TBVECHI
MeasurementSystem : Inch
ModelNumber : 77775
NumberOfItems : 1
PartNumber : AH-4UYS
ProductDescription :

Instructions:

1. Before using the welder, first check if the power supply meets the operating voltage.

2. Connect the welder output wire to the screw of the corresponding output stage (tighten the nut when the output wire is connected to the output pole)

3. When working, clamp the workpiece with the clip on the output black line, close to the tungsten needle (depending on the size and shape of the workpiece, generally the distance between the tungsten needle and the workpiece is between 0.5-1 mm). After the welding position is fixed, Jog the foot switch, and a high-temperature arc between the workpiece and the tungsten needle instantly welds the workpiece.

4. The discharge end of the tungsten needle must be kept sharp before use and during use to maintain a good discharge state.

5. Welding can change the output pulse current according to the size of the workpiece, the size of the solder joints, and the process requirements (the machine can weld 0.5-1.5MM). When the potentiometer is rotated clockwise, the output pulse current increases, whereas the output pulse current decreases.

Precautions:

If the place where the welder is placed is wet or not used for a long time, it will be damp. If it is found that the above phenomenon should be dried before use, the machine should be well grounded. Please pay attention to safety when using.

Standard accessories:

One host

power cable

Foot switch

Workpiece clip

Tungsten needle

Torch needle holder

Instruction manual

ProductSiteLaunchDate : 2019-09-19T10:09:05.882Z
Size : EACH
TargetAudienceKeyword1 : Casting Machines
TargetAudienceKeyword2 : Welding Machine
TargetAudienceKeyword3 : Jewelry Casting Supplies
TargetAudienceKeyword4 : Jewelry Making
TargetAudienceKeyword5 : Professional Audience