Cart 2 india

Specification
Brand : Generic
BulletPoint1 : 2mm thick pure copper bar, ultra-low internal increases capacity.
BulletPoint2 : With temperature control protection, the power will be cut off automatically when the temperature exceeds 60℃.
BulletPoint3 : This product supports 0.1-0.12 spot welding, which is saving time and effort.
BulletPoint4 : 6‑speed output power is adjustable, welding is more accurate, with Tуpe‑C port 2A input, spot welding machine charging faster.
BulletPoint5 : Suitable for and other cylindrical lithium batteries, -hydrogen batteries, - batteries, etc.
ExternallyAssignedProductIdentifier : 4773174661860
GpsrSafetyAttestation : 1
ItemName : Welder Machine Mini Spot Welder Adjustable Fast Lithium Battery DIY 12V with Customized Spot Welding Pen
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 26 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemTypeKeyword : spot-welding-equipment
Manufacturer : Generic
ModelName : Genericwcsovbtg9n
ModelNumber : Genericwcsovbtg9n
PartNumber : Genericwcsovbtg9n
ProductDescription : 1. This product supports 0.1-0.12 spot welding, which is saving time and effort.
2. 6‑speed output power is adjustable, welding is more accurate, with Tуpe‑C port 2A input, spot welding machine charging faster.
3. Suitable for and other cylindrical lithium batteries, -hydrogen batteries, - batteries, etc.
4. One customized spot welding pen, gold-plated pen end and copper barrel, easy to use.
5. With temperature control protection, the power will be cut off automatically when the temperature exceeds 60℃.
6. 2mm thick pure copper bar, ultra-low internal increases capacity.

Spec:
Item Type: Spot Welding Machine
Product Model: Upgraded Portable Spot Welder
Battery Type: Rechargeable lithium battery
Battery Capacity: 6700mAH
Output Voltage: 4.2V (Maximum)
Output Current: 650A (Maximum)
Design Current: 1000A (Maximum)
Input Interface: Type-C charging port
Input Parameters: 5V/2A
Recommended Strip Thickness: 0.1-0.12mm
How to Use:
1. Confirm that the spot welding pen is connected to the spot welding machine;
2. Confirm that the thickness of the sheet we sent is within 0.12mm;
3. Confirm the battery power, if the battery power is extremely low, the welding may not be firm;
4. Make sure that the welding place of the battery is clean, if it is dirty or has been welded, the welding may be weak;
5. Confirm the operation method. When spot welding, the spot welding needle may be close to the near point. Don't press the welding needle too hard, just put the sheet and the battery welding place near to each other;
6. Confirm whether the wire of the spot welding pen and the spot welding pen are tightly matched, and gently pull the wire and the spot welding pen. If there is looseness, the spot welding pen and the wire are not tightly matched.

PackageList:
1 x Spot Welding Machine
1 x Welding Pen

ProductSiteLaunchDate : 2024-10-28T05:33:05.562Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27110000