Cart 2 india

Specification
Brand : Wisoqu
BulletPoint1 : Welding power can be powered by lithium battery or 12V car battery.
BulletPoint2 : The controller adopts single chip microcomputer control, accurate output pulse, LCD display screen, can display welding parameters.
BulletPoint3 : The soldering pen and the input wire are connected by U‑shaped cold‑pressed terminals, which is convenient for disassembly and replacement.
BulletPoint4 : The controller adopts automatic welding mode, while retaining the manual trigger interface, you can choose according to your own usage.
BulletPoint5 : The power board uses 2 ounces of copper, and the soldering pen wire and the input wire use 10AWG multi‑wire soft wire to increase the overcurrent capacity.
ExternallyAssignedProductIdentifier1 : 608201123346
ExternallyAssignedProductIdentifier2 : 0608201123346
ItemLength : 720 inches
ItemName : Spot Welder, Mini Spot Welder Machine with LCD Display Screen, for Welding Small Battery Repair Power Banks, Power Tools, Model Airplanes
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 17 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spot-welding-equipment
Manufacturer : Wisoqu
Material : brass
ModelName : Wisoquc3refdi8h5
ModelNumber : Wisoquc3refdi8h5
NumberOfItems : 1
PartNumber : Wisoquc3refdi8h5
ProductDescription : Feature:
1. Five 300A MOS tubes are driven by imported special chips, and the MOS tubes can be used as fast as 20nS, which can switch quickly to prevent tube explosion.
2. The controller is mainly for welding 0.1mm to 0.15mm ‑plated steel strip, and the power input adds a 25V10000uF high‑frequency low‑resistance capacitor for energy compensation to increase stability.

Specification:

Item Type: Mini Spot Welder
Product Description:
1: This controller is mainly used for welding small battery repair power banks, power tools, model airplanes, etc.
2: This controller requires users to have a certain electronic basis and safety awareness.
3: Although sufficient protection has been done for the drive of the MOS tube, it is inevitable that the explosion tube will appear during use. If there is a explosion tube, just replace one.
4: For those with high welding requirements, please change the welding power source. After actual testing, when the battery uses 3S, 40C, 5000mHA, it can weld 0.1mm -plated steel strip and 0.15mm -plated steel strip perfectly. The welding needle needs to be ground into a round head, the pressing force is reduced, and it can also be welded; When the battery uses 12V, 50AH car level, it can weld 0.15mm -plated steel strip perfectly. Note that it is a car battery, not an ordinary lead- battery.
Size: Approx. 0.1 ~ 0.15mm / 0 ~ 0.01in

Package List:
1 x Spot Welder
1 x Connector
2 x Power Input Line
2 x Soldering Pen

ProductSiteLaunchDate : 2024-08-02T13:29:15.345Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 125 volts