Cart 2 india

Specification
Brand : PSUFURV
BulletPoint1 : 【HIGH QUALITY AND DURABLE】- The thickened sheet metal housing with painted finish is solid, effectively protecting of internal components and extending the service life.
BulletPoint2 : 【GOOD WELDING EFFECT】- Using the principle of plasma high-frequency discharge, a high-temperature arc is generated between the workpiece and the tungsten needle to form a molten pool at the metal welding junction instantaneously, allowing for smooth, firm, fast, and efficient welding.
BulletPoint3 : 【TWO OPERATION MODES】- According to the specific workpiece and your operating habits, a hand-held welding gun and a welding gun with a bracket are provided for your selection and replacement.
BulletPoint4 : 【EASY TO CARRY】- The permanent jewelry welder is lightweight, compact, and has a carrying handle on the top, making it convenient for you to carry when you go out to work.
BulletPoint5 : 【WIDE RANGE OF APPLICATION】- The jewelry welding kit can be used for the rapid welding of platinum, gold, K gold, silver, and steel. It is mainly used for welding the ring clasp of the jewelry. Workpieces such as metal plates and tubes cannot be welded.
IncludedComponents : 1 x Jewellery Spot Welding Machine
ItemName : PSUFURV Permanent Jewelry Welder 80A 600W Jewelry Spot Welding Machine with Two Operation Modes Electric Soldering Machine Gold Silver Jewelry Spot Welding Tool for Gold, K Gold, Silver
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemTypeKeyword : spot-welding-equipment
Manufacturer : PSUFURV
ModelName : PSUFURV Permanent Jewelry Welder
ModelNumber : LY57JUSWM
PartNumber : Genericg9osgc6fhx
PowerSourceType : electric
ProductDescription :

Specifications

• Material: Sheet Metal
• Color: Blue
• Model: 80A
• Welder Type: Electric Spot Welder
• Power: 600W
• Plug: US Standard
• Welding Range: 0.5-1.5mm/0.02-0.06in
• Input Voltage: 110 V
• Product Size: 25.5*24.8*13cm/10*9.8*5.1in
• Packing Size: 37*28*18cm/14.56*11.02*7.08in
• Gross Weight: 4.9kg/10.8lbs

 

Package Included

1 x Jewellery Spot Welding Machine

1 x Power Cord

1 x Foot Switch

1 x Tungsten Needle

1 x Fixture

1 x Hand-held Welding Guns

1 x Pedestal

1 x English Manual

Other Accessories for Use

 

Notes

1. Before using the welding machine, check whether the power supply meets the operating voltage. Connect the output wire of the welding machine to the screw of the corresponding polarity (tighten the nut when connecting the output wire to the output polarity).

2. When working, clamp the workpiece with the fixture, close to the tungsten needle. Depending on the size and shape of the workpiece, generally, the distance between the tungsten needle and the workpiece is 0.007-0.04in. The discharge end of the tungsten needle must be sharp before and during use.

3. When stepping on the foot switch, do not touch the metal part of the tungsten needle and the fixture at the same time, otherwise, there will be a feeling of acupuncture.

4. Please note that only 0.5-1.5mm diameter can be welded. Too thick or too thin can not be welded.

5. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included.

6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

ProductSiteLaunchDate : 2024-08-24T03:43:47.116Z
Size : 25.5*18.5mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 10
UnspscCode : 54100000