Cart 2 india

Specification
Brand : Walfront
BulletPoint1 : MCU Control---The controller adopts single chip microcomputer control, the output pulse is accurate, with good welding quality.
BulletPoint2 : LCD Screen Display---With LCD screen display, the controller can display the welding parameters, the reading is clearer.
BulletPoint3 : Automatic or Manual Control---The controller adopts automatic welding mode, while retaining the manual trigger interface, which can be selected according to your usage.
BulletPoint4 : With 10AWG Input Wire---The soldering pen input wire use 10AWG soft wire, with U shaped cold pressed terminal connection, easy to disassemble and replace.
BulletPoint5 : Stable Welding---Add a 25V 10000uF high frequency low resistance capacitor to the power input terminal for energy compensation and increase welding stability.
BulletPoint6 : [Delivery time limit] Arrive within 7-10 working days,10-15 working days for delivery in remote areas.
Color : 灰色
ExternallyAssignedProductIdentifier : 8431227845914
FinishType : Finish
FitType : Universal
HeatingElementType : Nickel
IncludedComponents : inc
ItemDisplayDimensions_Height : 1.38 centimeters
ItemDisplayDimensions_Length : 8.07 centimeters
ItemDisplayDimensions_Width : 1.38 centimeters
ItemLength : 16.7 inches
ItemName : Portable Spot Welder Machine PCB LCD Spot Welder Pen Kit or 12V Car 18650 Lithium Battery Mini Size Lithium Battery Spot Welding Machine Spot Welding Tool Set
ItemPackageDimensions_Height : 26.9 centimeters
ItemPackageDimensions_Length : 3.5 centimeters
ItemPackageDimensions_Width : 18.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spot-welding-equipment
Manufacturer : Walfront
Material : Material
Material1 : metal
Material2 : copper
ModelName : Jewelry Spot Welder
ModelNumber : K10V01G5GHE03JPVJQ
NumberOfItems : 1
PartNumber : Walfrontin39pzg5hv95
PowerSourceType : PowerSource
ProductDescription : How to Use:
1. Power Connection:
The controller comes with a 20cm long 10AWG input wire. U shape terminal is crimped on one end, and the other end is unprocessed. Connect the crimped U shape terminal to the control power input terminal, and process the other end according to your own power supply. Do not connect the wrong negative pole.
2. Power on and off:
There is a power switch under the control board. After pressing, wait 3 seconds. After the buzzer drops, the LCD lights up and the boot is completed. Press the power switch again to turn off.
3. Screen Description and Parameter Adjustment:
WELD ENERGY: 01‑99 (adjustable by up and down keys)
INPUT: Display the input power supply voltage
Welding Method: Manual or automatic (adjusted by the square label button.)
4. Welding:
Keep the solder pins clean. If the welding pin is ground into a round head, the welding effect can be improved. There are manual and automatic methods.

Specification:
Item Type: Portable Spot Welder Machine
Material: PCB + LCD
Product Use: Battery repair and small battery welding
Color: Red
Welding Method: Manual or automatic (adjusted by the square label button)
Power Input Cord Length: Approx. 21.5cm / 8.5in
Welding Pen Length: Approx. 42.5cm / 16.7in
Adapter Power Supply: 12V car battery, 3C/40-70C or 5000mAh lithium battery (not including battery)
Welding Nickel Sheet Thickness: 0.1-0.12mm

Package List:
1 x Spot Welding Machine
2 x Welding Pen
2 x Power Input Cable
1 x Connector
1 x English User Manual

Note:
1. Do not pull out the welding pen when in use.
2. Pay attention to moisture proof and waterproof.

ProductSiteLaunchDate : 2021-10-12T14:36:41.714Z
Scent : Unscented
Size : Medium
SpecificUsesForProduct : Industrial Use
Style : Pencil
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
Voltage : 220 volts
Wattage : 400 watts