Cart 2 india

Specification
Brand : MXBAOHENG
BulletPoint1 : DX-80A spot welder can be used for fast welding of platinum, gold, K gold, silver and steel.
BulletPoint2 : Precise welding of ring mouth, seed buckle, fine wire, direct welding without welding powder. The welding spot is smooth.
BulletPoint3 : Using the principle of plasma high frequency discharge, the molten pool is formed instantly at the metal welding joint.
BulletPoint4 : Please note that your foot cannot step on the foot switch for a long time, step on when welding and stop stepping the foot switch when stoping welding. A long time stepping on the switch, the machine will be in a short circuit state, will burn out the internal circuit.
BulletPoint5 : Flash is harmful to eyes, please take protective measures when using.
Color : White
ExternallyAssignedProductIdentifier : 8793030625696
FinishType : Titanium
HandOrientation : Ambidextrous
IncludedComponents : 120 x Flat white soapstone refills
ItemName : MXBAOHENG 2 in1 Pulse Spot Welder High Power Handheld Pulse Spot Welding Machine DX-80A Collision Welding Machine Jewelry Tools 500W AC220V/110V (110V)
ItemPackageDimensions_Height : 36.4998 centimeters
ItemPackageDimensions_Length : 16.2052 centimeters
ItemPackageDimensions_Width : 27.6098 centimeters
ItemPackageQuantity : 120
ItemTypeKeyword : spot-welding-equipment
Manufacturer : MXBAOHENG
Material : Metal
ModelName : Spot Welding Equipment
ModelNumber : Tenceur-Equipment-dfj463
NumberOfItems : 120
PartNumber : LD003
ProductDescription :

Technical Data:
Power Supply: 220V/110V 50Hz / 60Hz
Power: 500W
The maximum current up: 80A
Dimensions: 310 * 165 * 140mm
Weight : about 4.5kg
Installation:
1. The electrode holder, connect the output negative electrode holder, connect the positive output.
2. The tungsten needles can be sharpened on the grinder, use the point discharge principle.
3. tungsten needle diameter :1.5mm

Operation Steps:
1. Connect the power supply, turn on the power switch.
2. Adjust the power knob is divided into coarse and fine. Work requirements can be adjusted according to the scale values
3. Use the tweezers to clamp workpieces. workpiece interface alignment tungsten needle (best distance is 5mm) can not contact the workpiece.
4. Just take one push on the foot switch. (Foot away). spot welding is completed.

Note:
1. Pushing the foot switch can not be long, step on and then right away, if push the step switch long, the machine will get a short circuit, the internal circuit will burn
2. This machine is a precision Please use carefully.
3. The flash can make the eyes injury, do use protective measures.
4 foot switch is depressed, do not touch the metal parts of the tungsten needle and tweezers, otherwise there will be tingling.
5 Non-professionals do not overhaul, there are high electric power pressure inside.


ProductSiteLaunchDate : 2015-01-07T08:00:00.000Z
RecommendedUsesForProduct1 : Marking Out
RecommendedUsesForProduct2 : Drawing
RecommendedUsesForProduct3 : Sketching
RecommendedUsesForProduct4 : Writing
Size : 110V
Style : Knobs
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Alloy Steel
TargetGender : unisex
UnitCount : 120