Cart 2 india

Specification
Brand : LIYUANJUN
BulletPoint1 : 【Use Range】This jewelry welder can weld gold, silver, K gold, gold, palladium, platinum with a diameter of 1.3MM. Titanium, copper, and stainless steel jewelry with a diameter of about 1MM can be welded. Silver, copper, jade bracelets, small rings, earrings , Skilled can also weld small parts inside dental steel wire thermocouple clock, etc.
BulletPoint2 : 【Good Performacne】Welding can change the output pulse current according to the size of the workpiece, the size of the solder joints, and the process requirements (the machine can weld 0.5-1.5MM). When the potentiometer is rotated clockwise, the output pulse current increases, whereas the output pulse current decreases.
BulletPoint3 : 【What You Will Get】The spot welding machinne package includes one host, power cable, foot switch, workpiece clip, tungsten needle, torch needle holder, instruction manual. (The discharge end of the tungsten needle must be kept sharp before use and during use to maintain a good discharge state.）
BulletPoint4 : 【Warm Note】If the place where the welder is placed is wet or not used for a long time, it will be damp. If it is found that the above phenomenon should be dried before use, the machine should be well grounded. Please pay attention to safety when using.
BulletPoint5 : 【Main Parameters】 Power supply: AC110V; Power: 800W; Welding current: 0.5-80A continuously adjustable (pulse ignition); Welding range: 0.2-1.3mm; Product Size: 21.3 * 31 * 15cm/8.3*12.2*5.9inch; Product Weight: 5,5 kg
ExternallyAssignedProductIdentifier1 : 0789219694575
ExternallyAssignedProductIdentifier2 : 789219694575
FinishType : Finish
IncludedComponents : Jewelry Welder
ItemName : LIYUANJUN 800W Jewelry Welder, Permanent Jewelry Kit Spot Welding Machinne for Jewelry Repairing Hardware Workpiece Home DIY Adjustable Pulse Spot Welder with Tungsten Needles
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 23 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spot-welding-equipment
Manufacturer : LIYUANJUN
Material : Material
ModelName : Jewelry Welder
ModelNumber : Jewelry Welder
PartNumber : Yuecoomauxod5ncg7
Pattern : Solid
PowerSourceType : Jewelry Welder
ProductDescription :

Specification:

Adjustable pulse spot welding machine (JD welding machine)

Power supply: AC110V

Power: 800W

Welding current: 0.5-80A continuously adjustable (pulse ignition)

Welding range: 0.2-1.3mm

Product Size: 213 * 310 * 150 mm

Product Weight: 5,5 kg

Standard accessories:

One host

power cable

Foot switch

Workpiece clip

Tungsten needle

Torch needle holder

Instruction manual

Instructions:

1. Before using the welder, first check if the power supply meets the operating voltage.

2. Connect the welder output wire to the screw of the corresponding output stage (tighten the nut when the output wire is connected to the output pole)

3. When working, clamp the workpiece with the clip on the output black line, close to the tungsten needle (depending on the size and shape of the workpiece, generally the distance between the tungsten needle and the workpiece is between 0.5-1 mm). After the welding position is fixed, Jog the foot switch, and a high-temperature arc between the workpiece and the tungsten needle instantly welds the workpiece.

4. The discharge end of the tungsten needle must be kept sharp before use and during use to maintain a good discharge state.

5. Welding can change the output pulse current according to the size of the workpiece, the size of the solder joints, and the process requirements (the machine can weld 0.5-1.5MM). When the potentiometer is rotated clockwise, the output pulse current increases, whereas the output pulse current decreases.

Precautions:

If the place where the welder is placed is wet or not used for a long time, it will be damp. If it is found that the above phenomenon should be dried before use, the machine should be well grounded. Please pay attention to safety when using.

ProductSiteLaunchDate : 2023-11-14T03:03:40.871Z
ShellType : Hard
Size : #3
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetGender : unisex
UnitCount : 1
UnspscCode : 23270000