Cart 2 india

Specification
Brand : LENJKYYO
BulletPoint1 : Sturdy and Durable: Thickened sheet metal shell, spot welder surface paint treatment, strong, wear-resistant, rust-resistant, effective protection of internal components, prolonging the service life. Can be widely used for quick welding of platinum, gold, K gold, silver and steel. Mainly used for welding ring clasps for jewelry. (Note: Cannot weld workpieces such as metal plates and tubes
BulletPoint2 : Good Welding Effect: spot welder utilizes the principle of plasma high-frequency discharge to produce a high-temperature arc between the workpiece and the tungsten needle, which instantly forms a molten pool at the metal welding junction, making the welding smooth, firm, fast and efficient. The power of this jewelry spot welder is up to 600W, which can provide strong power to improve your working efficiency.
BulletPoint3 : Two Operation Modes: Depending on the specific workpiece and your operating habits, electric spot welder provides handheld welding torch and welding torch with stand for you to choose and change.
BulletPoint4 : Convenient Work, Simple Design: light weight, small size, with a carrying handle on the top, convenient for you to carry it when you go out to work. The four non-slip feet on the bottom of the welder ensure stable placement of the machine and prevent scratches on the table. The welding time is controlled by foot switch, which can improve the precision of spot welding and avoid interfering with hand operation.
BulletPoint5 : Intelligent Adjustment: According to the size of the workpiece, welding spot and process requirements, you can precisely adjust the output current by coarse adjustment knob and fine adjustment knob. The one-touch power switch, clearly graduated adjustment knob and recognizable operation interface make it easy for you to use.
BulletPoint6 : Good Heat Dissipation: There are several heat dissipation holes on the spot welding equipment to ensure stable welding performance and prevent the machine from being burned out after long-term operation.
ExternallyAssignedProductIdentifier : 8907832847273
IncludedComponents1 : 1 x Jewellery Spot Welding Machine+1 x Power Cord+1 x Foot Switch
IncludedComponents2 : 1 x Tungsten Needle+1 x Fixture+1 x Hand-held Welding Guns
IncludedComponents3 : 1 x Pedestal+1 x English Manual
IncludedComponents4 : 1* English Manual
IncludedComponents5 : Other Accessories
ItemName : LENJKYYO Jewelry Spot Welder Machine, Portable Welder Machine for Gold Silver Jewelry, 600W 80A Electric Spot Welder with Power Cord, Adjustable Soldering Machine for Platinum, Gold(Blue)
ItemTypeKeyword : spot-welding-equipment
Manufacturer : LENJKYYO
MetalType : other
ModelName : jewelry spot welder
ModelNumber : CJLY5
PartNumber : dyixq83816
PowerSourceType : dc
ProductDescription :

Specifications

Material: Sheet Metal

Color: Blue

Model: 80A

Welder Type: Electric Spot Welder

Power: 600W

Plug: US Standard

Welding Range: 0.5-1.5mm/0.02-0.06in

Input Voltage: 110 V

Product Size: 25.5*24.8*13cm/10*9.8*5.1in

Notes

1. Before using the welding machine, check whether the power supply meets the operating voltage. 

Connect the output wire of the welding machine to the screw of the corresponding polarity (tighten the nut when connecting the output wire to the output polarity).

2. When working, clamp the workpiece with the fixture, close to the tungsten needle. Depending on the size and shape of the workpiece, generally, the distance between the tungsten needle and the workpiece is 0.007-0.04in. The discharge end of the tungsten needle must be sharp before and during use.

3. Please do not put the welding machine in a damp place and keep it dry.

4. Please don't step on the foot switch for a long time. Step on it and move away immediately. If the switch is pressed for a long time and the machine is in a short circuit state, the internal circuit will be burned.

5. Strong light will be released during welding. Please wear protective glasses during welding and do not look directly at the welding part.

6. When stepping on the foot switch, do not touch the metal part of the tungsten needle and the fixture at the same time, otherwise, there will be a feeling of acupuncture.

7. Non-professional personnel are not allowed to disassemble and repair. There is a high voltage inside.

8. Please note that only 0.5-1.5mm diameter can be welded. Too thick or too thin can not be welded.

9. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included. 

ProductSiteLaunchDate : 2025-01-08T09:21:56.081Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 23271800
Wattage : 1