Cart 2 india

Specification
Brand : Naroote
BulletPoint1 : Welding power can be powered by lithium battery or 12V car battery.
BulletPoint2 : The controller adopts automatic welding mode, while retaining the manual trigger interface, you can choose according to your own usage.
BulletPoint3 : The soldering pen and the input wire are connected by U‑shaped cold‑pressed terminals, which is convenient for disassembly and replacement.
BulletPoint4 : The controller adopts single chip microcomputer control, accurate output pulse, LCD display screen, can display welding parameters.
BulletPoint5 : The power board uses 2 ounces of copper, and the soldering pen wire and the input wire use 10AWG multi‑wire soft wire to increase the overcurrent capacity.
Color : 1.6mm 1/16"
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 8270312999114
ExternallyAssignedProductIdentifier1 : 720340029089
ExternallyAssignedProductIdentifier2 : 0720340029089
ExternallyAssignedProductIdentifier3 : 00822635012438
FitType : Universal
Hazmat : 9
IncludedComponents : Contents:
ItemName : LCD Display Mini Spot Welding Machine, Easy to Disassemble Portable Spot Welder, Convenient for Power Banks Power Tools
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 17 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spot-welding-equipment
Manufacturer : Naroote
ModelName : CK Heat Shield
ModelNumber : 4HSGSLD
NumberOfBoxes : 1
NumberOfItems : 2
PartNumber : Narootek61bqhud2s
ProductDescription :

Feature:

1. Welding power can be powered by lithium battery or 12V car battery.
2. The controller adopts single chip microcomputer control, accurate output pulse, LCD display screen, can display welding parameters.
3. The soldering pen and the input wire are connected by U‑shaped cold‑pressed terminals, which is convenient for disassembly and replacement.
4. The controller adopts automatic welding mode, while retaining the manual trigger interface, you can choose according to your own usage.
5. The power board uses 2 ounces of copper, and the soldering pen wire and the input wire use 10AWG multi‑wire soft wire to increase the overcurrent capacity.
6. Five 300A MOS tubes are driven by imported special chips, and the MOS tubes can be used as fast as 20nS, which can switch quickly to prevent tube explosion.
7. The controller is mainly for welding 0.1mm to 0.15mm ‑plated steel strip, and the power input adds a 25V10000uF high‑frequency low‑resistance capacitor for energy compensation to increase stability.

Specification:

Item Type: Mini Spot Welder

Product Description:
1: This controller is mainly used for welding small battery repair power banks, power tools, model airplanes, etc.
2: This controller requires users to have a certain electronic basis and safety awareness.

3: Although sufficient protection has been done for the drive of the MOS tube, it is inevitable that the explosion tube will appear during use. If there is a explosion tube, just replace one.
4: For those with high welding requirements, please change the welding power source. After actual testing, when the battery uses 3S, 40C, 5000mHA, it can weld 0.1mm -plated steel strip and 0.15mm -plated steel strip perfectly. The welding needle needs to be ground into a round head, the pressing force is reduced, and it can also be welded; When the batt

ProductSiteLaunchDate : 2021-07-06T00:00:00.000Z
SpecificUsesForProduct1 : Professional
SpecificUsesForProduct2 : Amateur
Style : CK4 Series Large
SupplierDeclaredDgHzRegulation : unknown
TargetGender : unisex
UnitCount : 2