Specification Brand : JIANGSS BulletPoint1 : ☞【Pulse Argon Spot Welder】The output pulse current can be changed according to the workpiece size, welding spot size and process requirements . When the potentiometer rotates clockwise, the output pulse current increases and anticlockwise rotation the output pulse current decreases. BulletPoint2 : ☞【Product Parameters】Adjustable pulse spot welding machine.Spot Welder Power supply: AC110V/220V,Power: 800W, Welding current: 0.5-80A continuously adjustable (pulse ignition), Welding range: 0.2-1.3mm. BulletPoint3 : ☞【Easy to Use】Exquisite appearance, compact structure, easy to work and carry.Foot Pedal Control, Easy To Use.It made of high quality material, strong and durable, ensures long service time. BulletPoint4 : ☞【Scope of Use】It can weld gold, silver within 1mm in diameter. It can weld titanium, copper and stainless steel jewelry with a diameter of about 0.8mm, jade bracelets, small rings, earrings, skilled can also weld dental wire , clocks and other internal small parts. BulletPoint5 : ☞【Warm Tips】If the place where the electric pulse sparking welder is placed is wet or not used for a long time, it will be damp. If it is found that the above phenomenon should be dried before use. Color : Black ExternallyAssignedProductIdentifier : 9339465869886 ItemName : Jewelry Spot Welding Machine,Adjustable Pulse Sparking Spot Welder,Electric Jewelry Tool Kit, Portable Spot Welder with Foot Pedal for Platinum,Gold,Silver and Steel ItemPackageDimensions_Height : 19 centimeters ItemPackageDimensions_Length : 35 centimeters ItemPackageDimensions_Width : 29 centimeters ItemTypeKeyword : spot-welding-equipment Manufacturer : BEYKON Material : Plastic ModelName : 24FL5A1904 ModelNumber : 24FL5A1904 PartNumber : Spot Welder ProductDescription : Product Description
☞Instructions: 1. Connect the output line of the welding machine to the screw of the corresponding output stage (when the output line is connected to the output pole, tighten the nut) 2. When working, clamp the workpiece on the output black line with a fixture, close to the needle (according to the size and shape of the workpiece, the distance between the needle and the workpiece is usually 0.5-1mm). After the welding position is fixed, click the foot switch, and the high-temperature arc between the workpiece and the needle will weld the workpiece immediately. 3. The discharge end of the needle must be kept sharp before and during use to maintain a good discharge state.