Cart 2 india

Specification
Brand : HUIOP
BulletPoint1 : The spot welding machine comes with a nickel strip that can be held by one hand for easy use.
BulletPoint2 : 5V input (higher voltage is strictly prohibited), charging current 1A, it is recommended to use a 5V/2A charger. Supports charging while using.
BulletPoint3 : Supports nickel sheets with a thickness of 0.1-0.15mm, supports welding of 0.2mm nickel sheets at full charge, intelligent recognition, and fully automatic welding.
BulletPoint4 : Five adjustable power levels, four level battery display, one charging indicator light, and one fully charged indicator light.
BulletPoint5 : Real-Time Gear Display: The spot welder control board features 99 levels of power adjustment, which users can control based on their requirements. It¡¯s also designed with a digital tube display that shows real-time gear display, providing ease of use and convenience.
Color : Black
ExternallyAssignedProductIdentifier : 7593720016565
ExternallyAssignedProductIdentifier1 : 0769902901807
ExternallyAssignedProductIdentifier2 : 769902901807
IncludedComponents : 2 x Spot Welding Pen 2 x Pointed head Needle
IncludedComponents1 : One host, Power cable, Foot switch
IncludedComponents2 : Workpiece clip, Tungsten needle
IncludedComponents3 : Torch needle holder, Instruction manual
ItemName : HUIOP Thickness Nickel Sheet Welder,Portable Spot Welder 5 Gears Adjustable, Handheld Spot Welder 0.1~0.15mm Thickness Nickel Sheet Welder USB Charge 18650 Lithium Battery Spot Welding, ENLISH, Black
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 9
ItemTypeKeyword : spot-welding-equipment
Manufacturer : HUIOP
Material : Nickel sheets
ModelName : YWBL-WH819pch2gq3
ModelNumber : YWBL-WH819pch2gq3
NumberOfItems : 1
PartNumber : MMK22137U-MBM111
PowerSourceType : spot welder
ProductDescription : charged, capable of continuously welding 1000 times Five adjustable power levels, short press button control, blue light indication Charging port: USB plug for charging Charging voltage: 5V input (higher voltage input is strictly prohibited) Charging current: 1A (it is recommended to use a 5V/2A charger) This product supports charging while using. The remaining battery indicator is green (high), green flashing (medium high), red flashing (medium low), red (low). The red light is on and must be charged before it can work. Low battery level will affect the welding effect Switching on/off instructions: Short press to power on Long press to shut down 6 minutes without any action will automatically turn off Instructions: 1. Short press the button to turn on, long press the button for 3 seconds to turn off 2. After startup, the module is in automatic welding mode, and welding occurs once every 2 seconds 3. After turning on, the output power of the spot welding machine can be changed by briefly pressing the button, and the blue light indicates the gear position 4. Ensure that the welding surface of the battery is free of rust and clean and flat 5. Ensure that the nickel sheet is clean and flat 6. When the welding head detects contact with metal, it can output once, and after lifting it, it can be welded again for the next time 7. Set up the spot welding machine and press it with appropriate force to ensure good contact between the welding needle and the nickel sheet, as well as between the nickel sheet and the battery, without any suspension or poor contact. Welding can be carried out. Different nickel plate thicknesses and different gears are used, not necessarily the higher the power, the better the effect. You can try which gear is more suitable Package List: 1xSpot welding machine 1xNickel strip 1xUSB charging cable
ProductSiteLaunchDate : 2024-01-11T11:20:27.584Z
Size : ENLISH
Style : Portable
SupplierDeclaredDgHzRegulation : other
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1