Cart 2 india

Specification
Brand : Hobart
BulletPoint1 : Will adjust to almost any angle.
BulletPoint2 : Magnet holds up to 50 LBS.
BulletPoint3 : Conveniently swivels to accommodate any angle
BulletPoint4 : Strong Magnets
BulletPoint5 : Two separate magnets rotate
BulletPoint6 : Please note: the two electrodes must not be short-circuited.This product can be used with or without argon gas. But using argon gas, the welding effect is more perfect
CircuitBreakerType : Standard
Color : Defult
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 715959390965
ExternallyAssignedProductIdentifier2 : 0715959390965
ExternallyAssignedProductIdentifier3 : 00715959390965
IncludedComponents : Jewelry spot Welding Machine
IncludedComponents1 : Pneumatic Spot Weld Breaker
IncludedComponents2 : Pneumatic Spot Weld Breaker
IncludedComponents3 : Pneumatic Spot Weld Breaker
IncludedComponents4 : Pneumatic Spot Weld Breaker
IncludedComponents5 : Pneumatic Spot Weld Breaker
ItemDisplayWeight : 0.31 pounds
ItemName : Hobart 770564 Swivel Magnet
ItemPackageDimensions_Height : 31.8 centimeters
ItemPackageDimensions_Length : 4 centimeters
ItemPackageDimensions_Width : 14.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spot-welding-equipment
Manufacturer : Hobart
Material : default
Material1 : Blend
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
ModelNumber : 770564
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
NumberOfPoles : 1
PackageLevel : unit
PartNumber : 770564
ProductDescription : Specification:
Item Type: Spot Welder
Material: Metal
Color: Red+Blue+Black 
Input Line Length: Approx.20cm / 7.87in
Welding Pen Length: Approx.30cm / 11.81in
Weight: Approx.210g/7.4oz
Battery: lithium battery(Not Included) 
Quantity: 1 Set

Instructions for use:
1: Power connection
The controller comes with a 20cm long 10AWG input wire. One end has been crimped with a U-shaped terminal, and the other end has not been processed. Connect the crimped U-shaped terminal to the control power input terminal, and the other end is processed according to its own power supply. Do not connect the negative electrode wrong.
2: Switch on and off
There is a power switch under the control board. After pressing, wait for 3 seconds. After the buzzer drops, the LCD lights up and the boot is complete. Press the power switch again to shut down.
3: Screen description and parameter adjustment.
4: Welding
Keep the welding pin . If the welding pin is polished into a round head, the welding effect can be improved. There are manual and automatic methods.

Battery Selection:
1: 12V car battery from 25 to 40ah, requires good performance and low internal resistance.
2: 4000 to 6000mAh 45C to 60C 3S model aircraft lithium battery.
3: 30 to 35ah 12V capacity lithium battery pack.

Package List:
1 x Controller
1 Pair of Welding Pen 
1 Pair of Power Input Line(Red and Blue)
1 x Power Access Plug




ProductSiteLaunchDate : 2009-06-10T00:00:01-00:00
PullForce : 50 pounds
Size : default
SkipOffer : 1
Style : Portable
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 110 volts_of_alternating_current
Wattage : 100 watts