Cart 2 india

Specification
Brand : Eapmic
BulletPoint1 : 【Pulse Argon Spot Welder】- VONZOER Professional Jewelry Spot Welder Adjustable 800W 0.5-80A Pulse Argon Welding Machine Jewelry Welding Machine for Gold and Silver
BulletPoint2 : 【Wide Applications】- This pulse sparkle spot welder can weld silver, K gold, gold, palladium, platinum with a diameter of 1.3MM. Titanium, copper, and stainless steel jewelry with a diameter of about 1MM can be welded. Skilled person can also weld small parts inside steel wire thermocouple clock, etc.
BulletPoint3 : 【Main Parameters】- Item Name: Spot welder for jewelry; Power supply: AC110V; Power: 800W; Welding current: 0.5-80A continuously adjustable (pulse ignition); Welding range: 0.2-1.3mm; Item Size: 21.3x31x15cm (8.39x12.2x5.91 inch)
BulletPoint4 : 【Avant-garde Design】- Exquisite appearance, compact structure, easy to operate and carry, made of high quality material, strong and durable, ensures long service time.
BulletPoint5 : 【Warm Note】- If the place where the welder is placed is wet or not used for a long time, it will be damp. If it is found that the above phenomenon should be dried before use, the machine should be well grounded. Please pay attention to safety when using.
Color : Blue
ExternallyAssignedProductIdentifier : 5205889265716
FinishType : Finish
IncludedComponents : WELDING MACHIEN, SPOT WELDING HEAD, POWER CABLE
ItemName : Eapmic Jewelry Spot Welding Machine Jewelry Pulse Argon Spot Welder 110V 800W 0.5-80A Portable Pulse Sparkle Jewelry Welder for Gold Silver Platinum with Foot Pedal
ItemPackageDimensions_Height : 700 millimeters
ItemPackageDimensions_Length : 1000 millimeters
ItemPackageDimensions_Width : 600 millimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : spot-welding-equipment
Manufacturer : VONZOER
Material : Gold
Material1 : Stainless Steel
Material2 : Stainless Steel
Material3 : Stainless Steel
Material4 : Stainless Steel
Material5 : Stainless Steel
ModelName : TL-182
ModelNumber : TL-182
NumberOfItems : 1
PartNumber : we--348687
PowerSourceType : ac
ProductDescription :
Specifications
Power supply: AC110V
Power: 800W
Welding current: 0.5-80A continuously adjustable (pulse ignition)
Welding range: 0.2-1.3mm
Item Size: 21.3x31x15cm (8.39x12.2x5.91 inch)

Instructions
1. Before using the welder, first check if the power supply meets the operating voltage.
2. Connect the welder output wire to the screw of the corresponding output stage (tighten the nut when the output wire is connected to the output pole)
3. When working, clamp the workpiece with the clip on the output black line, close to the tungsten needle (depending on the size and shape of the workpiece, generally the distance between the tungsten needle and the workpiece is between 0.5-1 mm). After the welding position is fixed, Jog the foot switch, and a high-temperature arc between the workpiece and the tungsten needle instantly welds the workpiece.
4. The discharge end of the tungsten needle must be kept sharp before use and during use to maintain a good discharge state.
5. Welding can change the output pulse current according to the size of the workpiece, the size of the solder joints, and the process requirements (the machine can weld 0.5-1.5MM). When the potentiometer is rotated clockwise, the output pulse current increases, whereas the output pulse current decreases.

Package Includes
1x One host
1x Power cable
1x Foot switch
1x Workpiece clip
1x Tungsten needle
1x Torch needle holder
1x Instruction manual
ProductSiteLaunchDate : 2022-07-13T09:07:44.777Z
Size : Small
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 220 volts
Wattage : 4 kilowatts