Cart 2 india

Specification
Brand : DYRABREST
BulletPoint1 : [ Parameter】Adjustable pulse spot welding machine (JD welding machine). Power supply: AC110V. Power: 800W. Welding current: 0.5-80A continuously adjustable (pulse ignition).
BulletPoint2 : [ Widely Application】Sparkle spot welder can weld gold, silver, K gold, gold, palladium, platinum with a diameter of 1.3MM. Titanium, copper, and stainless steel jewelry with a diameter of about 1MM can be welded. Silver, copper, jade bracelets, small rings, earrings , Skilled can also weld small parts inside dental steel wire thermocouple clock, etc.
BulletPoint3 : [ Packing Including】1*Welder ;1*Foot Switch;1*Power Cable;1*Workpiece Clip;1* Tungsten Needle;1* Torch needle holder;1*Instruction Manual.
BulletPoint4 : [ Tips】If the place where the welder is placed is wet or not used for a long time, it will be damp. If it is found that the above phenomenon should be dried before use, the machine should be well grounded.
BulletPoint5 : [ Worry-free Service 】We provide 24-hour on line service and email Q&A service. Every products is under strict quality control before sale.IF it is still defective or can not be installed, pls contact us first, don't return it. We will try our best to solve your prooblem.Thank you !
Color : Blue
ItemName : DYRABREST Electric Jewelry Welding Machine, Pulse Sparkle Spot Permanent Jewelry Welder Kit with Foot Pedal for Platinum,Gold,Silver and Steel Small Rings, Earrings
ItemTypeKeyword : spot-welding-equipment
Manufacturer : Rowya
PartNumber : RW
ProductDescription :

Specification:

Adjustable pulse spot welding machine (JD welding machine)

Power supply: AC110V

Power: 800W

Welding current: 0.5-80A continuously adjustable (pulse ignition)

Welding range: 0.2-1.3mm

Velikost produktu: 213 * 310 * 150 mm

Celková hmotnost produktu: 5,5 kg

How to Use：

1. Before using the welder, first check if the power supply meets the operating voltage.

2. Connect the welder output wire to the screw of the corresponding output stage (tighten the nut when the output wire is connected to the output pole)

3. When working, clamp the workpiece with the clip on the output black line, close to the tungsten needle (depending on the size and shape of the workpiece, generally the distance between the tungsten needle and the workpiece is between 0.5-1 mm). After the welding position is fixed, Jog the foot switch, and a high-temperature arc between the workpiece and the tungsten needle instantly welds the workpiece

4. The discharge end of the tungsten needle must be kept sharp before use and during use to maintain a good discharge state

5. Welding can change the output pulse current according to the size of the workpiece, the size of the solder joints, and the process requirements (the machine can weld 0.5-1.5MM). When the potentiometer is rotated clockwise, the output pulse current increases, whereas the output pulse current decreases

Use range:

It can weld gold, silver, K gold, gold, palladium, platinum with a diameter of 1.3MM. Titanium, copper, and stainless steel jewelry with a diameter of about 1MM can be welded. Silver, copper, jade bracelets, small rings, earrings , Skilled can also weld small parts inside dental steel wire thermocouple clock, etc.

Precautions:

If the pla
ProductSiteLaunchDate : 2021-10-20T08:29:55.823Z