Cart 2 india

Specification
Brand : DNYSYSJ
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
Color : 100w
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 8270312999114
ExternallyAssignedProductIdentifier1 : 0723508047024
ExternallyAssignedProductIdentifier2 : 723508047024
ExternallyAssignedProductIdentifier3 : 00822635012438
FitType : Universal
Hazmat : 9
IncludedComponents : Contents:
ItemName : DNYSYSJ Automatic Spot Welder, 110V Jewelry Spot Welding Machine Pulse Argon Necklace Bracelet Arc Welding Machine for Gold, Silver, K Gold, Palladium, Platinum,Titanium, Copper
ItemPackageDimensions_Height : 29 centimeters
ItemPackageDimensions_Length : 34 centimeters
ItemPackageDimensions_Width : 33 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spot-welding-equipment
Manufacturer : DFragrant-US
Material : Metal
ModelName : CK Heat Shield
ModelNumber : DFASW1112
NumberOfBoxes : 1
NumberOfItems : 2
PartNumber : 2011121
PowerSourceType : ac
ProductDescription :

Instructions:

1. Before using the welder, first check if the power supply meets the operating voltage.

2. Connect the welder output wire to the screw of the corresponding output stage (tighten the nut when the output wire is connected to the output pole)

3. When working, clamp the workpiece with the clip on the output black line, close to the tungsten needle (depending on the size and shape of the workpiece, generally the distance between the tungsten needle and the workpiece is between 0.5-1 mm). After the welding position is fixed, Jog the foot switch, and a high-temperature arc between the workpiece and the tungsten needle instantly welds the workpiece.

4. The discharge end of the tungsten needle must be kept sharp before use and during use to maintain a good discharge state.

5. Welding can change the output pulse current according to the size of the workpiece, the size of the solder joints, and the process requirements (the machine can weld 0.5-1.5MM). When the potentiometer is rotated clockwise, the output pulse current increases, whereas the output pulse current decreases.

Use range:

➫ It can weld gold, silver, K gold, gold, palladium, platinum with a diameter of 1.3MM. Titanium, copper, and stainless steel jewelry with a diameter of about 1MM can be welded. Silver, copper, jade bracelets, small rings, earrings , Skilled can also weld small parts inside dental steel wire thermocouple clock, etc.

Specification:

Power supply: AC110V

Power: 800W

Welding current: 0.5-80A continuously adjustable (pulse ignition)

Welding range: 0.2-1.3mm

Standard Accessories:

1 * One host

1 * power cable

1 * Foot switch

1 * Workpiece clip

1 * Tungsten needle

1 * Torch needle holder

1 * Instruction manual

ProductSiteLaunchDate : 2020-11-12T05:40:42.782Z
SpecificUsesForProduct1 : Professional
SpecificUsesForProduct2 : Amateur
Style : CK4 Series Large
SupplierDeclaredDgHzRegulation : not_applicable
TargetGender : unisex
UnitCount : 2
Voltage : 110 volts
Wattage : 800 watts