Cart 2 india

Specification
Brand : awolsrgiop
BulletPoint1 : 【Sturdy and Durable】The product is made of high-quality metal with baking paint process, which is rust-proof, abrasion-resistant, corrosion-resistant and non-deformation. Heat dissipating holes: There are heat dissipating holes on three sides of the machine to ensure fast heat dissipation, protect the machine from burning and enable stable and continuous welding. Small footprint: Compact body (8.46*11.8*5.7 inches), suitable for a variety of countertops, small footprint.
BulletPoint2 : 【Stable Performance】Adopting high quality capacitors, strong anti-grid fluctuation ability, good voltage stabilisation, more stable welding performance, not easy to break the arc. High efficiency: Adopting high frequency plasma discharge principle and 500w high power ensures smooth welding joints with even texture, thus improving welding efficiency.
BulletPoint3 : 【Adjustable Power】You can adjust the output power according to the size of the welding wire through the coarse and fine adjustment knob to ensure smooth and efficient welding. Easy to use: Convenient on/off buttons, adjustment knobs, various sockets, an intuitive ammeter and a detailed english manual make it easy to use the machine. The foot pedal frees up your hands and saves labour when starting the welder.
BulletPoint4 : 【Top Handle Strap】Allows you to carry the machine to various workplaces as easily as a briefcase. Suitable for quick soldering of platinum, gold, karat gold, silver, copper and iron, as well as precision soldering of wires with rounded ends, oval buckles and fine wires. Suitable for eyeglasses repair, jewellery, tin toys, handicrafts, dentures, metal wires, diy, orthodontics and so on.
BulletPoint5 : 【Protective Shipping】To prevent as much as possible damage to the product during shipping, this product is shipped in a hard cardboard box, sponge and plastic bag, which can effectively resist normal squeezing and dropping. Non-slip foot pads: Four non-slip feet provide extra support to better keep the product stable, raise the bottom to avoid moisture and protect the countertop from scratches.
BulletPoint6 : 【Easy to Clean】Due to the smooth surface baking varnish, you can wipe the dirt on the machine with a rag. Please read the operation manual carefully before use and pay special attention to the safety instructions in it. Please keep the electrodes clean. After working for a while, it is recommended to sharpen the needle and remove impurities before continuing to use it.
BulletPoint7 : 【Note】Please check that the supply voltage matches. The machine power supply should be plugged into a primary power outlet, not a secondary power outlet (e.g. electric plug). Soldering tests must be carried out on the soldered parts. Please try to avoid triggering the switch without a soldered part. During the weld test, the current should be adjusted from small to large.
BulletPoint8 : 【Note】During welding, the workpiece must not be located at the tip of the tungsten needle or stepped on the pedal, as this may result in a short circuit of the machine. The two electrodes and the welding needle must not touch each other to avoid short circuit. Please do not step on the pedal for a long time, only step on it once and then start it immediately, otherwise it will easily cause short circuit.
BulletPoint9 : 【Note】Please do not put the machine in a wet place, keep it dry. Please do not touch the machine with wet hands. Please let professional personnel maintain the machine. Strong light will be emitted when welding. Please wear protective glasses (not included) when welding and do not look directly at the welding area. Please allow for slight colour difference due to shooting light and 1-3 cm error due to manual measurement and make sure you don't mind before ordering.
Color : Uncle*0.1mm*hugging
ExternallyAssignedProductIdentifier : 9469228845144
ExternallyAssignedProductIdentifier1 : 0614162663043
ExternallyAssignedProductIdentifier2 : 614162663043
FinishType : Finish
IncludedComponents : 1* Spot Welding Machine, 1* Foot Pedal, 1* Pedestal, 1* Handle, 1* Power Cord, 1* Fixture, 1* Tungsten Needle, 1* English Manual
IncludedComponents1 : 1 x Spot Welding Pen
IncludedComponents2 : 2 x Concentric Ball Needle
IncludedComponents3 : 2 x Spring
IncludedComponents4 : 1 x Hex Wrench
ItemName : awolsrgiop 50A 110V Jewelry Spot Welder, 500W Pulse Sparkle Spot Welder Machine with Handle Tool Jewelry Welding Tool for Gold Silver Platinum Adjustable Power for Glasses Repair, Jewelry, Handicrafts
ItemPackageDimensions_Height : 1.18 inches
ItemPackageDimensions_Length : 5.9 inches
ItemPackageDimensions_Width : 1.18 inches
ItemPackageQuantity : 1
ItemTypeKeyword : spot-welding-equipment
Manufacturer : awolsrgiop
Material : Metal, Plastic and Hardware
ModelName : jewelry pulse arc welder
ModelNumber : 1
NumberOfItems : 1
PartNumber : arc spot Welding Machine
PowerSourceType : Corded Electric
ProductDescription :

Description:

With the development of technology, the spot welding machine has become a tool that people often need to use in their lives. With a host, tungsten needle, foot pedal, fixture, comfortable handle, pedestal, and long power cord, this machine is an ideal choice for you. It features adjustment knobs, simple operation, a user-friendly ammeter, high quality, and stable performance, bringing you a professional soldering experience.

 

Specification:

Color: Blue

Model: DH-670

Material: Metal

Process: Baking Paint

Drive Type: Foot Pedal

Assembly Required: Yes

Shape: Rectangular

Plug: US Standard

Power Source: Corded Electric

Power Form: Pulse

Power: 500W

Voltage: 110V

Current: DC 50A      

Max. Welding Diameter: 0.5-1.2mm/0.02-0.05in

Product Size: 21.5*30*14.5cm/8.46*11.8*5.7in

Package Size: 41*23*17cm/16.14*9.06*6.69in

Gross Weight: 5.7kg/12.57 lbs

 

How to Use:                     

1. Tighten the nut when the output cable is connected to the output pole.

2. Clamp the workpiece on the black output cable near the tungsten needle with the fixture (Usually the distance between the tungsten needle and the workpiece is 0.5 to 1.2mm.).

3. Fix the welding position and move the foot pedal to produce a high-temperature arc between the workpiece and the tungsten needle.

 

Package Included:

1* Spot Welding Machine

1* Foot Pedal

1* Pedestal   

1* Handle  

1* Power Cord

1* Fixture

1* Tungsten Needle

1* English Manual

ProductSiteLaunchDate : 2023-07-21T03:02:48.005Z
Size : Welding Pen
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 110 volts
Wattage : 1000 watts