Cart 2 india

Specification
Brand : AGULIUM
BulletPoint1 : Efficient: 600 W power can realize spot welding in a shorter time. High-precision current regulations and tungsten needle welding head bring you smooth and solid welding
BulletPoint2 : Good Welding Effect: Using the principle of plasma high-frequency discharge, a high-temperature arc is generated between the workpiece and the tungsten needle to form a molten pool at the metal welding junction instantaneously, allowing for smooth, firm, fast, and efficient welding
BulletPoint3 : Intelligent Adjustment: According to the size of the workpiece, solder joint, and the process requirements, you can precisely adjust the output current through the coarse adjustment knob and the micro adjustment knob
BulletPoint4 : Two Operation Modes: According to the specific workpiece and your operating habits, a hand-held welding gun and a welding gun with a bracket are provided for your selection and replacement
BulletPoint5 : Application: The jewelry welder can be used for the rapid welding of platinum, gold, K gold, silver, and steel, which is mainly used for welding the ring clasp of the jewelry
IncludedComponents : F90ES IRON SPOT WELDER MACHINE+6100 ALUMINUM SPOT WELDER MACHINE+MIG250 WELDER MACHINE
IncludedComponents1 : 1 x Jewellery Spot Welding Machine; 1 x Power Cord; 1 x Foot Switch; 1 x Pedestal
IncludedComponents2 : 1 x Tungsten Needle; 1 x Fixture; 1 x Hand-held Welding Guns; 1 x English Manual
ItemName : AGULIUM Jewelry Spot Welder, 110V 600W Jewellery Spot Welding Machine, Portable Jewelry Welder with Foot Switch for Platinum, Gold, K Gold, Silver and Steel, 0.02-0.06in Welding Range
ItemTypeKeyword : spot-welding-equipment
Manufacturer : AGULIUM
ModelName : jewelry welder
ModelNumber : QCJLY57JUSW
PowerSourceType : Corded Electric
ProductDescription :

Application

It can be used for the rapid welding of platinum, gold, K gold, silver, and steel. It is mainly used for welding the ring clasp of the jewelry. Workpieces such as metal plates and tubes cannot be welded.

 

Specifications

• Material: Sheet Metal
• Color: Blue
• Model: 80A
• Welder Type: Electric Spot Welder
• Power: 600W
• Plug: US Standard
• Welding Range: 0.5-1.5mm/0.02-0.06in
• Input Voltage: 110 V
• Product Size: 25.5*24.8*13cm/10*9.8*5.1in 
• Gross Weight: 4.9kg/10.8lbs

Package

• 1 x Jewellery Spot Welding Machine
• 1 x Power Cord
• 1 x Foot Switch
• 1 x Tungsten Needle
• 1 x Fixture
• 1 x Hand-held Welding Guns
• 1 x Pedestal
• 1 x English Manual

Notes

• 1. Connect the output wire of the welding machine to the screw of the corresponding polarity (tighten the nut when connecting the output wire to the output polarity).
• 2. When working, clamp the workpiece with the fixture, close to the tungsten needle. Depending on the size and shape of the workpiece, generally, the distance between the tungsten needle and the workpiece is 0.007-0.04in. The discharge end of the tungsten needle must be sharp before and during use.
• 3. Please do not put the welding machine in a damp place and keep it dry.
• 4. Please don't step on the foot switch for a long time. Step on it and move away immediately. If the switch is pressed for a long time and the machine is in a short circuit state, the internal circuit will be burned.
• 5. Please wear protective glasses during welding and do not look directly at the welding part.
• 6. When stepping on the foot switch, do not touch the metal part of the tungsten needle and the fixture at the same time, otherwise, there will be a feeling of acupuncture.
• 7. If you aren't a professional personnel, you can't disassemble and repair. There is a high voltage inside.
• 8. Please note that only 0.5-1.5mm diameter can be welded. Too thick or too thin can not be welded.

ProductSiteLaunchDate : 2024-10-23T06:40:39.261Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 54100000