Cart 2 india

Specification
Brand : QUEMARQUE
BulletPoint1 : WIDE RANGE OF APPLICATIONS: The welding machine can weld gold, silver, gold, palladium and platinum with a diameter of 1.3MM. Can weld titanium, copper, stainless steel and other jewelry with a diameter of about 1MM. Jade bracelets, small rings, earrings can be welded.
BulletPoint2 : HIGH QUALITY MATERIAL: The spot welder is made of heavy duty stainless steel body, which is wear-resistant and durable and has a long service life.
BulletPoint3 : PULSE ADJUSTABLE: The output pulse current can be changed according to the size of the workpiece, the size of the welded joint and the process requirements 0.5-80A when welding (this machine can weld 0.2-1.5MM).
BulletPoint4 : CAUTION: If the place where the welder is placed is wet or not used for a long time, it will be wet. If the above phenomenon is found, it should be dried before use, the machine should be well grounded. Please pay attention to safety when using.
BulletPoint5 : SERVICE: If you have any questions, you can contact us, we will give you a satisfactory answer within 24 hours!
Color : Yellow
ExternallyAssignedProductIdentifier : 9554963788532
ExternallyAssignedProductIdentifier1 : 0743557553086
ExternallyAssignedProductIdentifier2 : 743557553086
IncludedComponents : One host, Power cable, Foot switch, Workpiece clip, Tungsten needle, Torch needle holder, Instruction manual
ItemName : 800W 110V Jewelry Spot Welding Machine Argon Pulse Sparkle Spot Welder for Gold Silver Jewelry, 0.2-1.3mm Welding Range Welding Tool Kit
ItemPackageDimensions_Height : 20 centimeters
ItemPackageDimensions_Length : 10.7 centimeters
ItemPackageDimensions_Width : 13.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spot-welding-equipment
Manufacturer : GoTo7
Material : Silicone
ModelName : SW-7306U
ModelNumber : W350460090825
NumberOfItems : 1
PartNumber : LAM0206
PowerSourceType : ac
ProductDescription :

Specification

Adjustable pulse spot welding machine (JD welding machine)

Power supply: AC110V

Power: 800W

Welding current: 0.5-80A continuously adjustable (pulse ignition)

Welding range: 0.2-1.3mm

Product size: 213*310*150mm

Total product weight: 5.5 kg

Use range

It can weld gold, silver, K gold, gold, palladium, platinum with a diameter of 1.3MM. Titanium, copper, and stainless steel jewelry with a diameter of about 1MM can be welded. Silver, copper, jade bracelets, small rings, earrings, Skilled can also weld small parts inside dental steel wire thermocouple clock, etc.

Instructions

1. Before using the welder, first check if the power supply meets the operating voltage.

2. Connect the welder output wire to the screw of the corresponding output stage (tighten the nut when the output wire is connected to the output pole)

3. When working, clamp the workpiece with the clip on the output black line, close to the tungsten needle (depending on the size and shape of the workpiece, generally the distance between the tungsten needle and the workpiece is between 0.5-1 mm). After the welding position is fixed, Jog the foot switch, and a high-temperature arc between the workpiece and the tungsten needle instantly welds the workpiece.

4. The discharge end of the tungsten needle must be kept sharp before use and during use to maintain a good discharge state.

5. Welding can change the output pulse current according to the size of the workpiece, the size of the solder joints, and the process requirements (the machine can weld 0.5-1.5MM). When the potentiometer is rotated clockwise, the output pulse current increases, whereas the output pulse current decreases.

Standard accessories

One host

power cable

Foot switch

Workpiece clip

Tungsten needle

Torch needle holder

Instruction manua
ProductSiteLaunchDate : 2023-04-19T08:10:40.480Z
Size : AC100-240V US plug
Style : Traditional
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1