Cart 2 india

Specification
Brand : Martin
BulletPoint1 : Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
BulletPoint2 : Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
BulletPoint3 : Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion
BulletPoint4 : Keyed to both shaft and drive component to provide higher torque carrying capacity
BulletPoint5 : Interchangeable with split taper bushings from various manufacturers
ExternallyAssignedProductIdentifier1 : 697950817767
ExternallyAssignedProductIdentifier2 : 0697950817767
ExternallyAssignedProductIdentifier3 : 00697950817767
ItemName : Martin U0 4 5/8 MST Bushing, Ductile Iron, Inch, 4.63" Bore, 6" OD, 5.25" Length
ItemPackageDimensions_Height : 5.25 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : split-taper-locking-bushings
Manufacturer : MARTIN
Material : Iron
MeasurementSystem : Metric
NumberOfItems : 1
PartNumber : U0 4 5/8
ProductDescription : Two styles of receiver bushings are available. Generally, the face mount receiver bushing is utilized in blind hole applications (Slip Fit). The back mount receiver bushing is used in through hole applications (Light Press Fit). Note: Installed bushings should be approximately .012" below subplate surface. See reference below for installation of back mount style bushings. Note on Installation of Back Mount Style: To alleviate the possibility of binding the shank in the bore, the maximum interference fit between bore and bushing O.D. should not exceed .0005".
ProductSiteLaunchDate : 2010-11-10T08:00:01.000Z
StreetDate : 2017-05-15T00:00:01Z
Style : 1610