Cart 2 india

Specification
Brand : CMFG
BulletPoint : Split taper bushings mount sheaves H-3/4" Inch ID: 0.75" H or QT Series
BulletPoint1 : STB Bushing:P1-1-1/8" inch bore;Screws:5/16-18UNCX1;Screws quantity:3
BulletPoint2 : Bushings bore:1-1/8" inch;Key:3/8X5/16X3/4";Key quantity:1
BulletPoint3 : Available in inch, millimeter.Bore range from 1/2",9/16",5/8"to1-3/4"
BulletPoint4 : Material: cast steel,H-style bushing for pulleys, inch bores, metric bores. Positive drive,Anti-rust treatment for added durablity,can adapt to most environments
BulletPoint5 : Enjoy a smooth&worry-free return service within a month
ExternallyAssignedProductIdentifier1 : 0751300788074
ExternallyAssignedProductIdentifier2 : 751300788074
ExternallyAssignedProductIdentifier3 : 7434097437617
IncludedComponents : NO
ItemName : CMFG STB Split Taper Bushings P1-1-1/8,1-1/8" inch Bore,Carbon Steel Material P1 Type Split Locking Bushings for Pulley
ItemPackageDimensions_Height : 1.38 inches
ItemPackageDimensions_Length : 2.64 inches
ItemPackageDimensions_Width : 2.64 inches
ItemPackageQuantity : 1
ItemTypeKeyword : split-taper-locking-bushings
Manufacturer : CMFG
Material : steel
ModelNumber : P1-1-1/8
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : P1-1-1/8
ProductDescription : P1 taper bushing,1-1/8" inch bore, carbon steel material, for pulley/sheave. Installation: Insert the bushing into the pulley, aligning the smooth hole of the bushing with the threaded hole of the pulley. When you tighten the bolt on the H-shaped bushing, it will be securely fastened to the shaft. Disassembly: First, remove the two bolts. Align the bolts with the threaded holes of the bushing. When tightening the bolts, the bushing and the pulley will separate.
ProductSiteLaunchDate : 2023-11-20T09:21:15.711Z
Size : 1-1/8"bore
Style : P1 type taper bushing
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31170000