Cart 2 india

Specification
Brand : StewMac
BulletPoint1 : For fine detail inlay routing
BulletPoint2 : Solid carbide lasts far longer than steel
BulletPoint3 : Reverse spiral flutes cut downward for cleaner, "no fuzz" edges in routed cavities
BulletPoint4 : Length 1-1/2" (38.10mm), shank diameter 1/8" (3.18mm)
BulletPoint5 : Comes in sturdy protective case, with bit cutting diamater size clearly marked
CuttingAngleString : 130.0 degrees
CutType : Spiral Cut
ExternallyAssignedProductIdentifier1 : 738685462317
ExternallyAssignedProductIdentifier2 : 0738685462317
ExternallyAssignedProductIdentifier3 : 00738685462317
FinishType : Polished
GpsrSafetyAttestation : 1
IncludedComponents : 1 Amana Branded Tool
ItemName : StewMac Carbide Downcut Inlay Router Bit, 3/64" (1.19mm) Diameter
ItemPackageDimensions_Height : 6.35 centimeters
ItemPackageDimensions_Length : 1.27 centimeters
ItemPackageDimensions_Width : 1.27 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : spiral-router-bits
Manufacturer : StewMac
Material : Carbide
Material1 : High Speed Steel
Material2 : Cobalt
ModelNumber : 5151
NumberOfFlutes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 5151
ProductDescription :

The best for inlay work! Solid carbide lasts far longer than steel, and reverse spiral flutes cut downward for cleaner, "no fuzz" edges in routed cavities.

Width of cut 3/64" (1.19mm)

Depth of cut 1/8" (3.18mm)

Each bit is 1-1/2" (38.10mm) long with a 1/8" (3.18mm) shank for Dremel and other rotary tools.

Use a larger inlay bit for removing wood in the middle of your inlay work, and save this bit for the fine details. The fine detail bits are fragile, for routing intricate details only.

ProductSiteLaunchDate : 2016-07-01T16:15:01.609Z
Size : 3/64 Dia x 1/8 Shank x 2"
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
UnitCount : 1
UnspscCode : 27110000