Cart 2 india

Specification
Brand : SpeTool
BulletPoint1 : UP & DOWN solid carbide compression spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1/10inch up cut area, 1 inch cutting length, 2-1/2 inch for overall length
BulletPoint2 : The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
BulletPoint3 : The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece
BulletPoint4 : The route bit suit for CNC router any brand plunge router with 1/4” collet
BulletPoint5 : Industrial quality control to ensure best performance
BulletPoint6 : SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
CutType : Up-Cut
EndCutType : Square End
ExternallyAssignedProductIdentifier1 : 760646130096
ExternallyAssignedProductIdentifier2 : 0760646130096
FinishType : ZrN
IncludedComponents : no
ItemName : SpeTool Compression Router Bit UP&Down Cut 1/10 inch UP Cutting 1/4 inch Cutting Diameter for Woodwork Edge Trimming CNC Router Engraving Carving Tools
ItemPackageDimensions_Height : 15.2908 centimeters
ItemPackageDimensions_Length : 1.397 centimeters
ItemPackageDimensions_Width : 8.6106 centimeters
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : spiral-router-bits
Manufacturer : SpeTool
Material : Tungsten Carbide
ModelNumber : W02010
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : W02010
ProductDescription :

The compression cutters are designed with both up and down-cut flutes. The top portion of the length of cut, closest to the shank, has a left hand spiral, forcing chips down. The bottom portion of the length of cut, closest to the end, has a right hand spiral, forcing chips up. When cutting, the opposing flute directions generate counteracting up-cut and down-cut forces. The opposing cutting forces stabilize the material removal, which compresses the composite layers, combatting delamination on the top and bottom of a workpiece.

Since compression cutters do not pull up or press down on a workpiece, they leave an excellent finish on layered composites and lightweight materials like plywood. It is important to note, however, that compression cutters are suited specifically to profiling, as the benefits of the up and down-cut geometry are not utilized in slotting or plunging operations.

ProductSiteLaunchDate : 2020-03-31T09:05:24.329Z
Size : 1/10" UP CUT-L1"
Style : 2 Flutes - 3/4"CL
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Wood
ToleranceHeld : Precision
UnitCount : 1