Cart 2 india

Specification
Brand : SpeTool
BulletPoint1 : SPECIFICATION. Solid carbide up down router bits with 1/2inch shank and 1/2inch cutting diameter, 1-1/2 inch cutting length, 4 inch for overall length, can be used on routers with 1/2" collect
BulletPoint2 : COMPRESSION CUT. The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece.
BulletPoint3 : DURABLE AND PRECISE. SpeTool up&down router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
BulletPoint4 : COMPATIBILITY. This 1/2 compression bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/2" collet.
BulletPoint5 : 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
BulletPoint6 : SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
CutType : Up-Cut
ExternallyAssignedProductIdentifier1 : 785533394399
ExternallyAssignedProductIdentifier2 : 733353414865
ExternallyAssignedProductIdentifier3 : 844278014112
ExternallyAssignedProductIdentifier4 : 0733353414865
ExternallyAssignedProductIdentifier5 : 0785533394399
ExternallyAssignedProductIdentifier6 : 0844278014112
ExternallyAssignedProductIdentifier7 : 00844278014112
GpsrSafetyAttestation : 1
IncludedComponents : Storage Case
ItemName : SpeTool 2PCS UP & Down Spiral Router Bits Sets with 1/2" Shank 1/2" Cutting Diamter Extra Long 4 Inch, Carbide CNC Compression Bits for Wood Carving Slots Mortises
ItemPackageDimensions_Height : 14.1986 centimeters
ItemPackageDimensions_Length : 2.3114 centimeters
ItemPackageDimensions_Width : 8.2042 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spiral-router-bits
Manufacturer : SpeTool
Material : Carbide
ModelNumber : SPL-D1/2-1/2-U$D
NumberOfFlutes : 2
NumberOfItems : 2
PartNumber : SPL-D1/2-1/2-U$D
ProductDescription :

The compression cutters are designed with both up and down-cut flutes. The top portion of the length of cut, closest to the shank, has a left hand spiral, forcing chips down. The bottom portion of the length of cut, closest to the end, has a right hand spiral, forcing chips up. When cutting, the opposing flute directions generate counteracting up-cut and down-cut forces. The opposing cutting forces stabilize the material removal, which compresses the composite layers, combatting delamination on the top and bottom of a workpiece.

Since compression cutters do not pull up or press down on a workpiece, they leave an excellent finish on layered composites and lightweight materials like plywood. It is important to note, however, that compression cutters are suited specifically to profiling, as the benefits of the up and down-cut geometry are not utilized in slotting or plunging operations.

ProductSiteLaunchDate : 2022-09-06T02:51:07.255Z
Size : COMPRESSION
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112800