Cart 2 india

Specification
Brand : Projahn
BulletPoint1 : Powerful
BulletPoint2 : Quality
BulletPoint3 : Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge
BulletPoint4 : For use on table mount and handheld router
BulletPoint5 : Silver induction brazing for maximum strength and durability
CuttingAngleString : 15 degrees
CutType : Round-Over Cut
ExternallyAssignedProductIdentifier1 : 4000146141236
ExternallyAssignedProductIdentifier2 : 04000146141236
ExternallyAssignedProductIdentifier3 : 00765573828528
IncludedComponents : Router Bits
ItemName : Projahn 141230 Spiral Drill Bit HSS-G DIN 338 Type N Turbo 12.3 mm
ItemPackageDimensions_Height : 3.6 centimeters
ItemPackageDimensions_Length : 3.6 centimeters
ItemPackageDimensions_Width : 14.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spiral-router-bits
Manufacturer : Projahn
Material : Carbide
ModelNumber : 141230
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : 141230
ProductDescription :

NOTE: 

1.A little rust preventive oil deposits on the sandblasted surface (looks a little dirty),is normal and doesn't affect the usage. Absolutely guaranteed to be a good quality new bits!

2.Insert the cutter shanks into the collets as deep as possible,leave 3mm or less shank showing. 

3.Before the product is received for using, check the drill bit for cracks or chips,we provide perfect after-sales service.

4.Trial cuts should be made on waste material before starting any project.

SAFETY INSTRUCTIONS:

1.Always wear dust protection mask,eye protection in the form of goggles, safety spectacles or a visor.

2.Make sure use on a router machine for which the product is applicable.

3.Please make sure that the Router Bits and router table connections is tight and avoid loosening and causing it to throw out !!!

4. Suitable for all woodworking projects for both professionals and hobbyists.

5.Always return the cutter to its packaging after use.

6.Before each use check that the cutting tool is sharp and free from damage. 

ROUTING SAFETY

1.Ensure the cutter can be used safely with the chosen router before use. Check that the cutter is fitted securely in the router collet.

2.Do not take heavy and deep cuts in one pass as this will overload the router. 

26.When stated, the speed range should be adhered to. Recommended speeds are shown in shop products descriptions.

ProductSiteLaunchDate : 2014-07-21T22:11:58.122Z
Size : 1/2"x 6Pcs
Style : 3/4" Radius - 1/2" Shank
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SurfaceRecommendation : Cast Iron
UnitCount : 1