Cart 2 india

Specification
Brand : MAGNATE
BulletPoint1 : 2-Flute Carbide Tipped; 1/2" Small Diameter; 1-1/2" Cutting Diameter; 1" Cutting Height
BulletPoint2 : 1/2" Shank Diameter; 2" Shank Length
BulletPoint3 : Leak-proof, the screws will not strip when tightened the clamps, high strength makes it firm to connect the devices for long time use.
BulletPoint4 : Easy to connect and disconnect, our hose repair kit ensures many years of dependable water hose repair.
BulletPoint5 : Only this hose repair kit and a screwdriver needed to finish the hose repairing work.
Color : One Color
CutType1 : Carbide-Tipped Cut
CutType2 : Flush-Trim Cut
ExternallyAssignedProductIdentifier : 7695732887666
ExternallyAssignedProductIdentifier1 : 637881809356
ExternallyAssignedProductIdentifier2 : 0637881809356
IncludedComponents : 1
ItemName : Magnate 0935 45° Bevel Spiral Carbide Tipped Router Bit - 1/2" Small Diameter
ItemPackageDimensions_Height : 1.2 centimeters
ItemPackageDimensions_Length : 2.4 centimeters
ItemPackageDimensions_Width : 7.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spiral-router-bits
Manufacturer : Magnate
Material : Carbide
ModelNumber : 125130
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : 935
ProductDescription : This bit is designed for the Legacy Ornamental milling machine. It creates spiral screws, and chamfered grooves on flat stock. It will work with the following pitches: 1-1/2", 3", 4-1/2", 6", 7-1/2", 9", 12" & 15". It can be also used as a chamfer, bevel, or flush trim bit. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. Always refer to the operation manual of your router first, in the event that a router bit doesn't come with a speed chart, you may start at about 2,000 rpm slower than the maximum speed described in the chart below. Maximum speed below is for reference only, actual best performance speed varies depending on a number of factors i.e. size of the router bit, the material to be cut, etc. Run 24,000 rpm maximum for 1" overall diameter router bits; Run 20,000 rpm maximum for 1-1/2" overall diameter router bits; Run 18,000 rpm maximum for 2" overall diameter; Run 16,000 rpm maximum for 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" overall diameter router bits; Run 10,000 rpm maximum for 3-1/2" overall diameter router bits;
ProductSiteLaunchDate : 2006-09-22T06:58:21.000-00:00
Size : 12.7x22.2x35.5
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27110000