Cart 2 india

Specification
Brand : Trvoxviq
BulletPoint1 : High Processing Efficiency--Special 2 flutes CNC Router Bits with large chip removal groove effectively reduces cutting resistance, convenient for chip removal, end with clean edge on both top and bottom face, non-stick with the spiral end mills, making the workpiece smoother and brighter, largely improving machining efficiency
BulletPoint2 : Spiral Router Bits Dimensions -- Shank Diameter: 1/4 inch (6.35mm); Cutting Diameter: 1/16'' (1.5mm); Cutting Length: 1/2'' (12mm); Overall Length: 2 inch (50mm); Material: Tungsten Steel. Please choose a cutting length that exceeds the board by 2-5mm, or it will result the end mill breaking.
BulletPoint3 : DLC(Diamond-Like Carbon) Coating 1/4 inch shank CNC end mills has the advantages of Ultra-High Hardness, Low Friction Coefficient, High Temperature Resistance, Good Electrical Insulation, Chemical Barrier, High Thermal Conductivity, Ultra-High Anti-Blocking
BulletPoint4 : Trvoxviq carbide CNC bits end mills are widely used for engraving soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4" collet. Suitable for all kinds of machines for fast engraving. 1/16'' cutting dia carbide milling cutters are perfect for CNC data machine, milling machine, drill machine.
BulletPoint5 : Trvoxviq 1/4'' CNC milling cutters are made of solid tungsten steel with micro particles and processed with high precision, it is integrally formed with high hardness, good wear resistance, not easy to break, also has high processing accuracy and long service life. The handle of the carbide end mills is designed with anti slip, making it more tightly clamped.
CutType : Flush-Trim Cut
CutType1 : Dovetail Cut
CutType2 : Carbide-Tipped Cut
ExternallyAssignedProductIdentifier1 : 0764126753881
ExternallyAssignedProductIdentifier2 : 764126753881
ExternallyAssignedProductIdentifier3 : 00042526931130
GpsrSafetyAttestation : 1
IncludedComponents : Up Cut Spial Router Bit 1/4 Inch
ItemName : 1/4'' Shank Spiral Router Bit, 2 Flutes Up Cut CNC Router Bits Carbide End Mills 1/16'' Cutting Dia 1/2'' Cutting Length with Coating Spiral CNC Bits Milling Cutters for Woodwork Mortise Slot(2PCS)
ItemPackageDimensions_Height : 0.6 inches
ItemPackageDimensions_Length : 3.8 inches
ItemPackageDimensions_Width : 3.2 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : spiral-router-bits
Manufacturer : Trvoxviq
Material : Tungsten Steel
Material1 : Solid Tungsten Carbide
Material2 : 40Cr Steel
ModelNumber : 116FGTH2P
NumberOfFlutes : 2
NumberOfItems : 2
PackageLevel : unit
PartNumber : 116FGTH2P
Pattern : Double Bearings
ProductDescription : 1/4 Inch Shank Spiral Router Bit, 2 Flutes Up Cut CNC Router Bits Carbide End Mills 1/16'' Cutting Dia 1/2 inch Cutting Length with Coating Spiral CNC Bits Milling Cutters for Woodwork Mortise Slot

High Processing Efficiency--Special 2 flutes CNC Router Bits with large chip removal groove effectively reduces cutting resistance, convenient for chip removal, end with clean edge on both top and bottom face, non-stick with the spiral end mills, making the workpiece smoother and brighter, largely improving machining efficiency

Spiral Router Bits Dimensions -- Shank Diameter: 1/4 inch (6.35mm); Cutting Diameter: 1/16'' (1.5mm); Cutting Length: 1/2'' (12mm); Overall Length: 2 inch (50mm); Material: Tungsten Steel.

Please choose a cutting length that exceeds the board by 2-5mm, or it will result the end mill breaking.

DLC(Diamond-Like Carbon) Coating 1/4 inch shank CNC end mills has the advantages of Ultra-High Hardness, Low Friction Coefficient, High Temperature Resistance, Good Electrical Insulation, Chemical Barrier, High Thermal Conductivity, Ultra-High Anti-Blocking

Trvoxviq carbide CNC bits end mills are widely used for engraving soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working.

It can be used with cnc router and handheld router with 1/4" collet.

Suitable for all kinds of machines for fast engraving.

1/16'' cutting dia carbide milling cutters are perfect for CNC data machine, milling machine, drill machine.

Trvoxviq 1/4'' CNC milling cutters are made of solid tungsten steel with micro particles and processed with high precision, it is integrally formed with high hardness, good wear resistance, not easy to break, also has high processing accuracy and long service life.

The handle of the carbide end mills is designed with anti slip, making it more tightly clamped.
ProductSiteLaunchDate : 2024-05-07T03:47:21.536Z
Size : Down Cut
Style : Rectangle Inserts
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112803