Cart 2 india

Specification
Brand : YG
BulletPoint : CLEVELAND Spiral Flute Tap,#8-32,HSS C58434
BulletPoint1 : High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
BulletPoint2 : Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
BulletPoint3 : Round shanks allow use with a wide variety of toolholding systems
BulletPoint4 : When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
BulletPoint5 : 1.09375-inches thread length
Color : Silver Tone
ExternallyAssignedProductIdentifier1 : 697334584346
ExternallyAssignedProductIdentifier2 : 0697334584346
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : Spiral Flute Tap,#8-32,HSS
ItemName : YG-1 G0 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Modified Bottoming Chamfer, 5/8"-18 Thread Size, H3 Tolerance
ItemPackageDimensions_Height : 3.2 inches
ItemPackageDimensions_Length : 0.4 inches
ItemPackageDimensions_Width : 0.01 inches
ItemPackageQuantity : 1
ItemTypeKeyword : spiral-flute-threading-taps
Manufacturer : YG-1 Tool Company
Material : high-speed steel
ModelName : 3/8-16 UNC
ModelNumber : G0663
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : G0663
PowerSourceType : hand_powered
ProductDescription : Description:Made of high-speed steel, the tapping bit has high hardness, toughness and wear resistance, and can stably remove chips during cutting. Uncoated taps only have a base substrate, which is very suitable for a wide range of applications.
Thread tapping bit features spiral point, plug chamfer and right hand thread cutting. Straight groove taps can remove chips downward, with clear threads and sharp cutting edges, ensuring fast and accurate tapping.
Screw tap can be used for drilling and tapping of stainless steel, aluminum, cast iron, alloy steel, ordinary steel, non-ferrous metals, hard plastics, etc. The grooves on the tap facilitate the removal of chips and debris from the hole.
Suitable for drilling machines, tapping machines, CNC machine tools and milling machines. The speed is controlled according to the hardness of the material. The higher the hardness, the slower the speed. Use with tapping oil to improve processing accuracy and reduce the probability of breakage.
It is recommended to use a machine tap with a tap chuck with overload protection function. The tapping angle should be 90 degrees vertical and stable, and the tapping depth should not exceed 1.5 times the tap diameter.
Specification:
Thread Size: 3/8-16 UNC
Shank Side Width: 6mm / 0.24 inch
Thread Length: 25mm / 1 inch
Total Length: 80mm / 3.1 inch
Accuracy: B2
Material: HSS 6542 (High Speed Steel 6542)
Finish: Uncoated

Package Content:
2pcs x Spiral Point Thread Tap
ProductSiteLaunchDate : 2013-09-23T00:00:01-07:00
Size : 5/8"
SpecificUsesForProduct : Tapping
Style : Spiral Point Tap
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700