Cart 2 india

Specification
Brand : WAAZVXS
BulletPoint : ACS550-01-04A1-4 Drive Vector Control Frequency Inverter 1.5kw VFD AC
BulletPoint1 : Model: GDL110-30-24Z/4.5; Diameter (mm): 110mm; Cooling method: water cooling
BulletPoint2 : Speed regulation mode: The three-phase output inverter can change the spindle speed by changing the frequency of the inverter.
BulletPoint3 : Power: 4.5kw; Voltage: 220V 380V; Current: 15.5/9.2A; Torque: 1.79Nm; Frequency:800Hz
BulletPoint4 : Speed: 24000RPM; Number of poles: 4 P; Phase: 3 phase asynchronous driver
BulletPoint5 : Rotation: Seen from the shaft end, it rotates counterclockwise; Tool handle: BT30 ER32; Pull stud: BT30-45°
Color : BT30 380V
ExternallyAssignedProductIdentifier : 7807792531001
ItemName : WAAZVXS GDL110-30-24Z/4.5KW 220V/380V Water Cooled Spindle 24000rpm Automatic Tool Changer Spindle BT30 for Metal Cutting (Color : BT30 380V)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-spindle-sanders
Manufacturer : WEIWEIBEIER
Material : metal
ModelName : WWBR
ModelNumber : WWBR
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : WWBR
ProductDescription : Grease lubricationMain use: Carving wood,PCB, PVC, PM-MA, plastic, two-color board (ABS) and other non-metals.1.Double sealing and air sealing structuredouble sealing air seal structure greatly improves the waterproof performance, which is widely used in copper, aluminum, steel and other gold,it is the center field of carving,cutting,stone and CNC fine carving processing.2.Equipped with standard BT30 taper holesThe shaft ends are connected with standard BT30 taper holes. The spindle adopts 4 imported high-precision P4 bearings, which effectively ensures the operation and machining accuracy of the spindle.The working environment temperature of the spindle is usually -1040.Rotate the spindle head by hand before installing the spindle, make sure it is flexible and without blockage.4 pole fully sealed angular contact ceramic bearings can extend the service life of the spindle.The longer of the length, the greater of the torque and power.Carefully assembled makes the spindle more precise.The accuracy is 0.01mm, and the coaxial cable is less than 0.0025mm1. Our main shaft uses 4 bearings.2. Bearings are resistant to high temperature and low heat3.Ceramic ball bearings: low friction, low noise and long service life.The water-cooled spindle must be used together with water pump. Otherwise, the spindle will quickly break.The AC spindle motor must be used together with inverter. The power of the inverter needs to be equal to or larger than the spindle. Before using, please set the inverter parameters suitable for the spindle. Otherwise, the spindle and inverter will break immediately.When using the spindle, if the sound is different from before, so please stop it immediately and replace the spindle bearing.The electric spindle must be installed in the clamping position, otherwise it is easy to damage the bearing!2. The spindle must be completely stopped to change the tool, and the
ProductSiteLaunchDate : 2024-05-13T08:19:05.726Z
Size : One Size
UnitCount : 1
UnspscCode : 26111500