Cart 2 india

Specification
Brand : CNCTOPBAOS
BulletPoint1 : Parameters of Spindle: Model Number: RTM120x103-30-24/7.5; Power: 7.5KW; Voltage: 220V; Maximum Torque: 7.2N.m; Rated torque: 6N.m; Rated Speed: 12000RPM; Max Speed: 24000RPM; Max. Frequency: 800Hz; Bearing: 4 bearings(2x7008 nd 2x7006); Nose: BT30; Motor pole: 4 Pole; Current: 12A; Defend grade: IP53; Insulation grade: F
BulletPoint2 : Parameters of VFD: 7.5KW Fuling VFD Inverter 220V; Input Phase: 1 phase or 3 phase; Input Frequency: 50-60Hz (±5Hz); Output Voltage: 220V; Output Phase: 3 phase; Output Current: 31A; Output Frequency: 0-1000Hz; Control Method: V/F control
BulletPoint3 : Advantages of Spindle: This spindle is built-in type spindle motor, built-in three asynchronous motors,as the spindle has a compact structure,high power, big torque, small vibration, low noise characteristics,so it can achieve high speed,high powe cutting,high recision and high stability operation.The bearing of spindle use grease lubricated angular to contact bearings
BulletPoint4 : Multi functional of the VFD: 8-stage simple PLC function, multi-speed control and PID control;Support multiple frequency settings:digital setting, analog setting, PID setting, RS485 communication setting;I/O terminals can be programmed;With over torque and under torque detection;Automatic voltage adjustment function;Over-current,over-voltage, under-voltage, over-heat, overload, lack of equal real-time monitoring
BulletPoint5 : User manual: The spindle and VFD will be sent out after testing,and we will provide the PDF user manual of the spindle and VFD,pls notice all parameters of the VFD are pre-set before leaving the factory,so you can directly use it to run the spindle,no need to set up the VFD
Color : silvery white
ExternallyAssignedProductIdentifier1 : 0670016707325
ExternallyAssignedProductIdentifier2 : 670016707325
IncludedComponents : Spindle/VFD/Tool holder
ItemName : CNCTOPBAOS 7.5KW BT30 Automatic Tool Change ATC Air Cooled Spindle Motor 220V 24000rpm 800Hz 4 Pole with 7.5KW VFD Inverter CNC Kit for CNC Router Milling Engraving Machine w/ BT30-ER25 Tool Holder
ItemPackageDimensions_Height : 13 inches
ItemPackageDimensions_Length : 28 inches
ItemPackageDimensions_Width : 11 inches
ItemPackageQuantity : 1
ItemTypeKeyword : power-spindle-sanders
Manufacturer : Changzhou Rattm Motor Co.,Ltd
ModelName : RTM120X103-30-24/7.5
ModelNumber : RTM120X103-30-24/7.5
NumberOfItems : 1
PartNumber : 22cn
ProductDescription :

Package include:

1 x 7.5KW ATC Automatic Tool Changer Air cooled spindle motor 220V (BT30 800hz 24000rpm)

1 x 7.5KW Fuling Inverter VFD 220V

1 x BT30-ER25-70L Tool Holder with 45 degree pull stud

2 x Air plug

Pdf. English user manual

7.5KW ATC Spindle Parameters:

Model Number: RTM120x103-30-24/7.5

Maximum Torque : 7.2N.m

Rated torque : 6N.m

Rated Speed: 12000RPM

Max Speed: 24000RPM

Max. Frequency: 800Hz

Voltage : 220V

Bearing : 4 bearings(2x7008 and 2x7006)

Nose : BT30

Motor pole : 4 Pole

Current:12A

Defend grade: IP53

Insulation grade:F

Inverter Parameters:

 7.5KW VFD Inverter 220V

Input Phase: 1 phase or 3 phase

Input Frequency: 50-60Hz (±5Hz)

Output Voltage: 220V

Output Phase: 3 phase

Output Current: 31A

Output Frequency: 0-1000Hz

Control Method: V/F control

Descriptions

1.This spindle is built-in type spindle motor, built-in three asynchronous motors,by the inverter control.As the spindle has a compact structure,high power, big torque, small vibration, low noise characteristics,so it can achieve high speed,high powe cutting,high recision and high stability operation.

2.The bearing of spindle use grease lubricated angular to contact bearings,can be achieved lifelong lubricating within the life cycle.

3.This spindle uses air cooling to cool the motor and front and rear bearings. The wind is provided by the fan at the rear end, from the rear of the spindle through the inner and outer air slots directly to the front of the spindle, there by taking away the heat generated by the high-speed rotation of the spindle, achieving thermal balance, and keeping the temperature of the electric spindle within a certain value.

ProductSiteLaunchDate : 2024-10-23T07:00:00.000Z
StreetDate : 2024-10-23T07:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 39120000