Cart 2 india

Specification
Brand : Garosa
BulletPoint1 : MAIN FUNCTION: With this analyzer, you can easily view the frequency points, adjust your own , switch to a relatively empty frequency point, and improve the quality.
BulletPoint2 : TFT COLOR SCREEN: This analyzer adopts a 2.4 inch TFT color display screen, allowing you to clearly see data.
BulletPoint3 : BATTERY DISPLAY: There is battery power display in the upper right corner of the screen, making it easier for you to the analyzer in a timely manner.
BulletPoint4 : LONG STANDBY: Built in 600mAh , with a working current of around 160mA, the network analyzer has a standby time of about 4 hours.
BulletPoint5 : LIGHT INDICATION: TYPE C interface, convenient for charging, with a charging voltage of 5V, the red light indicates charging, and the green light indicates fully charged.
Color : Black
ExternallyAssignedProductIdentifier : 4861282244874
IncludedComponents : No
ItemName : 2.4G 5G Analyzer Scanner User Analyzer 2.4 Inch TFT Color Screen Light Indication Network Scanner Analyzer for Smart Homes Businesses
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 16 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spectrum-analyzers
Manufacturer : Garosa
MeasurementAccuracy : 0.1mm
ModelName : Garosay1r2f9gxwp
ModelNumber : Garosay1r2f9gxwp
NumberOfItems : 1
PartNumber : Garosay1r2f9gxwp
ProductDescription : Spec:
Item Type: Analyzer
Material: ABS
Battery: Rechargeable 600mAh x 1 (built in)
Charging Management Circuit: The working current is about 160mA, and the standby time is about 4 hours, charging time is about 2 hours
Charging: TYPE C interface, charging voltage is 5V. When charging, a red light indicates charging, and a green light indicates fully charged
Screen: 2.4 inch TFT color display screen

How to Use:
1. Long press the button to turn on the device, and long press again to turn it off.
2. Press the button once to start scanning, and press the button again to pause scanning.
3. The waveform on the screen displays the of all frequency points in the 2.4G frequency band. The original frequency point only displays the strongest . But if there are multiple at the same frequency point, they are displayed in numbers below the corresponding coordinate scale, such as the number 5, indicating that the same frequency point has 5 occupied. The waveform below the screen corresponds to the waveform of the 5G . The interpretation method is the same as above.
Package List:
1 x Analyzer
1 x USB Cable


ProductSiteLaunchDate : 2024-02-26T17:28:58.598Z
Size : 26"
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41113600