Cart 2 india

Specification
Brand : Arconic
BulletPoint1 : “K” designates a cast alloy standard with modified composition that can be used as a range standard for calibration
BulletPoint2 : Certified reference material for aluminum alloy with size 2.5” Ø (64mm) x 1" (25mm) circular disk
BulletPoint3 : NIST traceable certified concentrations for up to 31 elements ranging from ppm to percent levels
BulletPoint4 : Extensive statistical analysis used to ensure homogeneity/ accuracy of final concentration values
BulletPoint5 : All products are stenciled to show catalog number, product lot and section number
Hazmat : 9
ItemDisplayWeight : 0.5 pounds
ItemName : Aluminum Certified Reference Material, Cast Alloy, 3XX, KA390
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : spectrometer-accessories
Manufacturer : Arconic Inc.
ModelNumber : L1201654
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : KA390
ProductDescription : Arconic Spectrochemical Reference Materials, located at the Arconic Technology Center near Pittsburgh, Pennsylvania has been producing certified reference materials (CRMs) and reference materials (RMs) for the aluminum industry for more than 70 years. Our CRMs are widely recognized for their uniformity and accuracy of certification. Arconic CRMs and RMs are typically used for calibration, drift correction, quality assurance, and method validation for Spark-AES instrumentation used by the aluminum industry to verify the composition of aluminum and aluminum alloys. We maintain a large inventory of CRMs and RMs consisting of more than 300 alloy compositions targeted to meet the needs of the aluminum industry. Arconic Spectrochemical Reference Materials holds accreditations for the following ISO standards: Guide 34:2009, 17025:2005, and 9001:2008. Arconic produces CRMs for many of the casting alloys registered by the Aluminum Association. CRMs identified with the ‘SS’ prefix followed by the alloy designation denote the CRM that most closely matches the nominal registered composition. CRMs identified with the ‘KA’ through ‘KJ’ prefixes are range CRMs. These are typically used for establishing calibration curves by bracketing the composition range of one or more elements in the alloy of interest.
ProductSiteLaunchDate : 2017-01-13T21:39:46.612Z
StreetDate : 2018-05-27T00:00:01Z
UnitCount : 1