Cart 2 india

Specification
Brand : Electron Microscopy Sciences
BulletPoint1 : Cure at elevated temperatures under pressure.
BulletPoint2 : Cannot be re-melted after mounting.
BulletPoint3 : Engraved Periodic Table
Capacity : 1 kilograms
Color : Black
ItemName : Black bakelite with Carbon Filler, thermosetting
ItemPackageDimensions_Height : 10 millimeters
ItemPackageDimensions_Length : 10 millimeters
ItemPackageDimensions_Width : 10 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : specialty-non-ferrous-metals-raw-materials
Manufacturer : EMS
Material : Copper
ModelNumber : 1216
NumberOfItems : 1
PartNumber : 1216
ProductDescription : When preparation requirements include less expensive, uniform size and shape, and short processing times, hot mounting is ideal.

Hot mounting takes place under pressure in a mounting press with the mounting resin. A temperature of up to 200 deWhen preparation requirements include less expensive, uniform size and shape, and short processing times, hot mounting is ideal.

Hot mounting takes place under pressure in a mounting press with the mounting resin. A temperature of up to 200 degree C, and a pressure of up to 50kN are then applied. Hot mounting processes are done with thermoplastic resins and thermo-setting resins.

Thermoplastic resins melt when heated, so repeating the process with the same specimen is possible. Thermoplastic resins harden during a chemical reaction with or without pressure so high pressure is not necessary during heating and cooling. This process is good when mounting fragile specimens.

Thermo-setting resins cure at elevated temperatures under pressure and cannot be re-melted after mounting.
ProductSiteLaunchDate : 2017-11-09T08:00:00.000Z
SafetyDataSheetUrl : https://www.emsdiasum.com/microscopy/technical/msds/1216.pdf
Size : 1 kg/EA
Style : Thermosetting
UnspscCode : 41000000