Cart 2 india

Specification
Brand : AB Tools
BulletPoint1 : M6 - M10
BulletPoint2 : Helicoil Thread Repair Kit
BulletPoint3 : Supplied with three different length inserts
BulletPoint4 : Creates stronger internal thread in soft materials
BulletPoint5 : Supplied in a case
Color : Black
ExternallyAssignedProductIdentifier : 5056133309300
ExternallyAssignedProductIdentifier1 : 848238063295
ExternallyAssignedProductIdentifier2 : 0848238063295
ExternallyAssignedProductIdentifier3 : 00848238063295
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
IncludedComponents : Tap
ItemDisplayDimensions_Height : 1 inches
ItemDisplayDimensions_Length : 1 inches
ItemDisplayDimensions_Width : 1 inches
ItemDisplayWeight : 0.33 pounds
ItemName : AB Tools Thread Installation and Repair kit helicoil Set 88pc Metric Sizes M6-M10 AN047
ItemPackageDimensions_Height : 17.5 centimeters
ItemPackageDimensions_Length : 1.1 centimeters
ItemPackageDimensions_Width : 10.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-spark-plug-thread-repair-kits
Manufacturer : AB Tools
Material : Aluminum
ModelName : ALL11056
ModelNumber : ALL11056
NumberOfBoxes : 1
NumberOfItems : 1
OemEquivalentPartNumber : ALL11056
PackageLevel : unit
PartNumber : AN047
PowerSourceType : Hand Powered
ProductDescription : Manufactured from chrome vanadium steel for strength and durability.

Ideal for restoring damaged threads in steel, cast, iron and aluminium.

Suitable for engine repair and other automotive applications.

Simple and easy to use;

1. Drilling clear the damaged threads with a standard drill (included). (To repair a spark plug thread no predrilling is necessary if using the special spark plug tap), please pay attention that for fluteless taps bigger holes are required.

2. Check check that the thread and pitch of the tap and the bolt match

3. Tapping use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)

4. Install the insert place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Don't work against the thread direction as the tang could break

5. Tang removal After finishing lift the installation tool and use the tang break tool to remove the tang. For bigger sizes and spark plug taps use long nose pliers to remove the tang. Due to the narrow and exact tolerances the new thread normally is stronger than the original ones.

Set includes the following:

- 3 x Installation tools.

- 3 x break pin tools.

- 3 x twist drills.

- 3 x taps.

- 1 x hex key.

110pc wire thread inserts

- M6 x 1.0 x 8.0mm (x22)

- M8 x 1.25 x 10.8mm (x22)

- M10 x 1.5 x 13.5mm (x22)

Comes in a metal tin for easy storage and transportation

Professional tool for commercial or occasional use.


ProductSiteLaunchDate : 2013-08-06T00:00:01-07:00
Size : 1/8"-27
StreetDate : 2016-01-20T00:00:01Z
Style : NPT Tap
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700
WarrantyDescription : 90 day