Cart 2 india

Specification
Brand : Criditpid
BulletPoint1 : Package include: 1Pc x 306 Watt Igniter.
BulletPoint2 : Manufacture part number: 3-20-677200 Replaces part numbers: 1-10-06620, 3-20-06783.
BulletPoint3 : Watts: 306, Length: 3.25", Width: 3/8" Rod With 1" Fins, Connectors: Male Spades.
BulletPoint4 : This 306 Watt igniter is compatible with all automatic ignition Harman stoves. Was formally a 15 Fin. Compatible with all Harman models listed. P35i, P43, P61A, P68, Advance, Accentra, 52i, XXV, PF100, PB105
Color : Black
ItemName : Criditpid Replacement EF-161 Exhaust Blower Motor for Enviro EF2 EF3 Meridian, Vistaflame VF100 Pellet Stove, GF55-002 Combustion Blower for Regency GF55, GFI55 Pellet Stove.
ItemPackageDimensions_Height : 20.0914 centimeters
ItemPackageDimensions_Length : 18.3896 centimeters
ItemPackageDimensions_Width : 19.5072 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : space-heater-replacement-parts
Material : Stainless Steel
MountingType : Freestanding
ProductDescription : Igniter failure can be verified on one of three ways.
1. start your stove and visually look for the orange glow;
2. physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated.
3. Use a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. With the igniter removed from the stove, you will need to look over the part to find the rated watts.
If your Ohms reading is within 10%, more or less than the rating (46Ω +/-10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. It’s usually good to look at the part itself for the watts rating.
ProductSiteLaunchDate : 2023-08-29T10:56:27.620Z
Style : No
SupplierDeclaredDgHzRegulation : not_applicable