Cart 2 india

Specification
Brand : Tassteen
BulletPoint1 : Sound vibrations are broadcast through the air, causing issues with noise entering and exiting your house studio. This sound absorbing panel is designed to reduce within an environment. The Bass Trap Studio enhances the sound quality and aesthetics of any recording or listening environment.
BulletPoint2 : For maximum noise absorption. Helps to flutter echoes and reduce excess reflections and reverberation. Improves vocal clarity and acoustics of your room; Highly fire retardant
BulletPoint3 : Cutting: 1. Use the mark to mark the bass trap studio foam to the right size. Tape measure and mark. Use a utility knife . With thicker foam, it may take several times to fully cut. Anechoic studio bubble. 2. Another cut is to compress the foam along the marked line. In the first step. As the material is compressed, it reduces the amount. Must pass completely cut the foam.
BulletPoint4 : Applications: Auditoriums, Broadcast Studios , Computer Rooms , Equipment Enclosures , Equipment Rooms , Gymnasiums , Ranges, Home Recording, Studios, Home Theaters , Industrial Facilities , Professional Theaters , Professional, Recording Studios , Warehousing Facilities
BulletPoint5 : General installation tips: Soft-sounding bass trap studio foam is usually mounted in a work room, the overall acoustic performance of the space be improved. It is very important to distribute the panel evenly throughout the room. Not in a regional cluster. Bass Trap Studio Foam is modular mode - Joints are not always perfectly aligned when they are end to end. This is further explained below.
Color : black
ExternallyAssignedProductIdentifier : 4711761552955
FitType : Vehicle Specific
ItemName : Tassteen 40 Pcs Corner Bass Trap Acoustic Panel Studio Sound Absorption Foam 12 X 12 X 24cm
ItemPackageDimensions_Height : 105 centimeters
ItemPackageDimensions_Length : 25 centimeters
ItemPackageDimensions_Width : 23 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : drum-set-sound-shields
Manufacturer : Tassteen
ModelName : 750190211
ModelNumber : 750190211
NumberOfItems : 10
PartNumber : 750190211
ProductDescription : Tassteen Required tools: Utility knife, Straight edge, tape measure, Caulking , Pencil or chalk line
Due to shipping requirements, we compressed
Easy to transport acoustic foam. Please give up until 24 hours.
After 48 hours, the foam returned to normal size.
The polyurethane foams outlined in these instructions do not belong to Class A fires
May not be accepted in a business environment.
The installation method:
1. Put bass trap studio foam in your specific application - Remember, you want the bubble to be evenly distributed throughout room.
2. Measure any area that needs to cut foam on site. Make appropriate cuts (eg: , Doorway, or if you need a short film).
3. After all works have been tailored, return the work to its original location
In the proper position or ceiling and gently mark the bottom. And on the side of each piece be lightly guaranteed with a pencil Apply directly.
adhesive. Create a perimeter outside the material left
1 1/2 inch from the edge, creating an X pattern at the center material.
5. Match the material with marked in step 3 and . Resolutely resist compressed foam material. Repeat steps. The remaining foam block.
colour: black
Material: Polyurethane foam
size: 12 x 12 x 24cm

Package Content:
40 x pcs Acoustic Foams

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
ProductSiteLaunchDate : 2025-02-21T09:18:09.756Z
Size : One Size
UnitCount : 44.6216
UnspscCode : 10191701