Cart 2 india

Specification
Brand : TOPINCN
BulletPoint1 : [Easy Installation] With a modular design and user-friendly interface, the outdoor noise sensor is convenient to set up and operate, providing an efficient solution for noise measurement and monitoring tasks.
BulletPoint2 : [ Construction] Constructed with aluminum alloy, the noise meter detector is built to withstand industrial demands and features an ip55 proof rating for dust and water resistant.
BulletPoint3 : [Digital and Modular Design] The sound level meter utilizes digital processing chips for high reliability and stability, offering a wide dynamic range without the need for range conversion.
BulletPoint4 : [Accurate Measurements] Equipped with advanced technology, the meter delivers precise readings, ensuring data for noise level monitoring in various environments.
BulletPoint5 : [Versatile Usage] This industrial noise sensor is suitable for measuring noise in machinery, vehicles, ships, and electrical appliances, as well as for environmental noise monitoring and occupational health protection.
ExternallyAssignedProductIdentifier : 7676990098780
IncludedComponents : No
ItemName : Sound Level Meter Aluminium Alloy High Accuracy Noise Transducer Environment Decibel Meter Noise Transducer for Vehicles DC9-30V (YGC-ZS-KV-A1)
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 33 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemTypeKeyword : sound-and-noise-meters
Manufacturer : TOPINCN
MeasurementAccuracy : 0.1mm
ModelName : evhooei9e7106gzg
ModelNumber : TOPINCNamqryh5onu-12
NumberOfItems : 1
PartNumber : TOPINCNamqryh5onu-12
ProductDescription : Specification:
Item Type: Noise Transducer
Length: Approx. 292mm / 11.5in
Power Supply: DC 9-30V
Measurement Range: 30-130dB(A)
Sensitivity: -38±3dB (or 12.6mv/Pa)
Resolution: 0.1dB
Accuracy: ±3dB, calibrated at 23±5℃ ambient temperature, frequency weighted in accordance with IEC 61672 type 2 standard, calibration performed under the condition of input at 94dB (1kHz)
Frequency Range: 20Hz-12.5kHz
Response Time: 200ms, time response simulates the human ear's time response
Calibrator: for Bruel and Kjaer company, multifunction sound calibrator, model 4231
Microphone: Electret microphone
Directivity: Omnidirectional
Microphone Size: 0.5 Inch
Load Capacity: Impedance ≤350Ω for current output when powered by DC12V, ≤900Ω for current output when powered by DC24V, impedance ≥1KΩ for voltage output.
Maximum Power Consumption: 500mW
Material: Aluminum Alloy
Operating Environment: Temperature: -40℃-80℃, Humidity: ≤1 00 % RH Non Condensing
Proof Grade: IP55
Troubleshooting :
The meter displays an incorrect value when outputting. It may be due to the wiring problem or communicating serial port failure that the correct data cannot be obtained. Please check whether the wiring is correct and firm, whether the serial port is occupied, and whether the serial port setting is correct.
Line Sequences:
Wire Color: Output Signal, Current
Red: Positive Power Supply
Black: Negative Power Supply
Yellow: Signal
Weight: Approx. 418.00g / 14.74oz

How to Use:
Install and use according to the appropriate voltage.

Package List:
1 x Noise Transducer
1 x Cable
1 x Manual

ProductSiteLaunchDate : 2024-09-29T17:15:02.467Z
Size : YGC-ZS-KV-A1
UnitCount : 1
UnspscCode : 41113700