Cart 2 india

Specification
Brand : Pssopp
BulletPoint1 : [HIGH SENSITIVITY NOISE TESTER] volume recording for accurate measurements.
BulletPoint2 : [DIGITAL NOISE TESTER] Convenient data collection and analysis for noise monitoring.
BulletPoint3 : [AUDIO MEASURE DEVICE] Capture real-time results with fast/slow response modes for flexibility.
BulletPoint4 : [EASY TO USE] Small and lightweight design for effortless transportation.
BulletPoint5 : [RELIABLE ACCURACY] Scientifically designed for precise and rigorous testing.
CustomerPackageType : Standard Packaging
ItemName : Digital Noise Tester Lightweight Sound Level Meter for Accurate Volume Measurement, RealTime Decibel Detection Device with Maximum/Minimum Value Measurement (Plastic, 9.1x2.8in)
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 26 centimeters
ItemPackageDimensions_Width : 21 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sound-and-noise-meters
Manufacturer : Pssopp
Material : Metal
ModelNumber : Pssoppug8qsyr0ma
NumberOfItems : 1
PartNumber : Pssoppug8qsyr0ma
ProductDescription : 1. [HIGH SENSITIVITY NOISE TESTER] volume recording for accurate measurements.
2. [DIGITAL NOISE TESTER] Convenient data collection and analysis for noise monitoring.
3. [AUDIO MEASURE DEVICE] Capture real-time results with fast/slow response modes for flexibility.
4. [EASY TO USE] Small and lightweight design for effortless transportation.
5. [RELIABLE ACCURACY] Scientifically designed for and rigorous testing.

Spec:
Item Type: Noise Tester
Material: Plastic
Size: Approx. 23x7cm / 9.1x2.8in
Weight: Approx. 618g / 21.8oz
Sensor: 1/2 Inch Condenser Microphone
Measuring Range: 30~130dBA/35~130dBC
Measurement Accuracy: ±1.5dB
Frequency Response: 31.5Hz~8.5KHz
Frequency Weighting: A/C
Digits: 5 Digits
Resolution: 01dB
Time Weighting: Fast/Slow
Maximum Lock: Support
Power Supply: 4x1.5V AA Batteries (Batteries Not Included)

How to Use:
Preparations before :
1. Open the battery cover and install the battery on the bulb holder
2. Replace the battery cover.
3. When the battery power is low, a symbol will appear on the LCD panel, indicating that the current battery power will not be enough, and a new battery must be replaced.
4. When using a DC power converter, please insert the output plug (3.5) of the DC power converter into the DC6V jack on the side of the meter.
matters:

1. Press the power switch and then release it.
2. Press level▲ or select the appropriate gear to measure the current noise, with reference to the absence of UNDER or OVER symbols.
3. If you want to measure the sound with the ear as the sensing volume, please select dBA.

Package List:
1 x Noise Tester (Battery Not Included)
1 x Manual
1 x Power Cord
1 x Circle Protector

Note:
1. Do not place it in a high temperature or humid place.
2. The ambient noise must be lower than the noise of the measured object before it can be measured
ProductSiteLaunchDate : 2024-02-23T14:53:36.788Z
Size : 2-10 GPH Water
Style : Brass Valve
UnitCount : 1