Cart 2 india

Specification
Brand : GLOGLOW
BulletPoint1 : [HIGH SENSITIVITY] - Detect noise levels from 30 to 130dBA/35 to 130dBC.
BulletPoint2 : [MEASUREMENT ACCURACY] - ±1.5dB for reliable and precise readings.
BulletPoint3 : [WIDE FREQUENCY RESPONSE] - 31.5Hz~8.5KHz for comprehensive analysis.
BulletPoint4 : [USER-FRIENDLY] - 5-digit display with resolution of 0.1dB for easy reading.
BulletPoint5 : [TIME & FREQUENCY WEIGHTING] - Choose between fast/slow response and A/C frequency weighting.
Color : As Shown
IncludedComponents : Sound Pressure Meter
ItemName : Decibel Detection Data Recording Noise Tester for Accurate Volume Measurement, Lightweight Sound Level Meter for Noise Monitoring Instrument Users
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 26 centimeters
ItemPackageDimensions_Width : 21 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sound-and-noise-meters
Manufacturer : GLOGLOW
Material : copper+metal
ModelName : Gloglowykm6ufnhwx
ModelNumber : GLOGLOWykm6ufnhwx
PartNumber : GLOGLOWykm6ufnhwx
ProductDescription : 1. [HIGH SENSITIVITY] - Detect noise levels from 30 to 130dBA/35 to 130dBC.
2. [MEASUREMENT ACCURACY] - ±1.5dB for reliable and precise readings.
3. [WIDE FREQUENCY RESPONSE] - 31.5Hz~8.5KHz for comprehensive analysis.
4. [USER-FRIENDLY] - 5-digit display with resolution of 0.1dB for easy reading.
5. [TIME & FREQUENCY WEIGHTING] - Choose between fast/slow response and A/C frequency weighting.

Specification:
Item Type: Noise Tester
Material: Plastic
Size: Approx. 23x7cm / 9.1x2.8in
Weight: Approx. 618g / 21.8oz
Sensor: 1/2 Inch Condenser Microphone
Measuring Range: 30~130dBA/35~130dBC
Measurement Accuracy: ±1.5dB
Frequency Response: 31.5Hz~8.5KHz
Frequency Weighting: A/C
Digits: 5 Digits
Resolution: 01dB
Time Weighting: Fast/Slow
Maximum Lock: Support
Power Supply: 4x1.5V AA Batteries (Batteries Not Included)

How to Use:
Preparations before operation:
1. Open the battery cover and install the battery on the bulb holder
2. Replace the battery cover.
3. When the battery power is low, a symbol will appear on the LCD panel, indicating that the current battery power will not be enough, and a new battery must be replaced.
4. When using a DC power converter, please insert the output plug (3.5) of the DC power converter into the DC6V jack on the side of the meter.
Operation matters:

1. Press the power switch and then release it.
2. Press level▲ or select the appropriate gear to measure the current noise, with reference to the absence of UNDER or OVER symbols.
3. If you want to measure the sound with the ear as the sensing volume, please select dBA.

PackageList:
1 x Noise Tester (Battery Not Included)
1 x Manual
1 x Power Cord
1 x Circle Protector

Note:
1. Do not place it in a high temperature or humid place.
2. The ambient noise must be lower than the noise of the measured object before it can be measured normally.
3. Please take out the
ProductSiteLaunchDate : 2024-02-23T11:50:38.299Z
Size : 3.5×3.8CM
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 53120000